That’s a good price . I don’t see the Trailblazer ones though. Sucks because that would be a cheap body drop even though it’s minimal.
2013 Suburban, rattle or tapping noise from the right rear wheel well area.
- Thread starter George B
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
kbuskill
***CAUTION*** I do my own stunts!
Here you go...
https://www.prothanesuspensionparts.com/prothane-packagedeal004
A little more expensive but not much.
I saw that but it’s suspension bushings only, no body mounts.
kbuskill
***CAUTION*** I do my own stunts!
Yep just realized that... my bad.
I know, I thought for a minute they were included due to the pic but then it says it’s not “application specific “ and I looked at the parts list and no body mounts. That’s deceiving imo.
kbuskill
***CAUTION*** I do my own stunts!
I wonder if the body mounts for the older box body blazers would be the same height as a Trailblazer?
IDK.
OP
OP
George B
¯\_(ツ)_/¯
I thought about changing them all but want to put the money into a BB tune and I still need a front diff. I will be happy to just get this one mount quiet.
kbuskill
***CAUTION*** I do my own stunts!
Good plan... I just wanted to make sure you were aware of all the options.
I wasn't sure how much the stock parts were going to set you back and figured it might be just as cheap to go poly as OEM parts are usually at a premium.
gooffeyguy
Tom
Don't poly bushings usually squeek unless lubed?
Sent from my SM-G930V using Tapatalk
Sent from my SM-G930V using Tapatalk
kbuskill
***CAUTION*** I do my own stunts!
Yes... he has a rattle now... I figured his next thread could be about a squeek... lol
OP
OP
George B
¯\_(ツ)_/¯
I decided to go ahead and order enough of the little mount insulator things do do the whole side of the truck. Since I will have all the mount bolts out and that side lifted. Who wants to bet I get a noise on the other side after this?
gooffeyguy
Tom
Probably will, but at least you will know what is causing it!
Sent from my SM-G930V using Tapatalk
OP
OP
George B
¯\_(ツ)_/¯
While I am waiting for parts I am trying to figure out what lifting point to use for lifting the body. I planned to use a 4x4 to spread the weight. I was thinking of lifting between the #3 and #4 mounts as far out near the rocker as possible.
the upfitter guide might have some kind of info on that.
OP
OP
George B
¯\_(ツ)_/¯
Link?
a lot of technical drawings I don't know if any of that will help but I figured it might be worth a shot
https://www.gmupfitter.com/files/media/photo/436/2012_LD_Util_071713.pdf
https://www.gmupfitter.com/files/media/photo/436/2012_LD_Util_071713.pdf
