Show off your exterior lighting mods

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

drowssap

Full Access Member
Joined
Apr 15, 2017
Posts
265
Reaction score
289
Location
Colorado
All of my lights are now LEDs. Did the 4 switchback mod with amber corner lights. All switchbacks light as DRL and parking/turn signals. Also used the Novita electronic flasher so no resistors are needed, and I previously did the diode modification so I have All-On-High. I like the result.


This might be to old but any chance that you can post links to bulbs you used in lower lights as well as diode and write up of diode mod? Thanks
 

mountie

Elite Member
Supporting Member
Joined
May 9, 2018
Posts
7,068
Reaction score
13,809
Location
Wellington, Fl., (formally Kalifornia)
o5single.... I just got my TRS Morimoto HID 880 fog kit with 35w / 5500k bulbs.

Trying to mentally install the kit (first).... Not sure where the "OEM input" plugs into??

Uh, yes..... I will be calling TRS for help.....
But I was thinking, to rig the harness, I might begin by installing the bulbs, and run from there, to see where / how to locate the cute little boxes -n- such.
 
OP
OP
05Single

05Single

afraid of the dark
Joined
Feb 26, 2015
Posts
8,243
Reaction score
11,639
o5single.... I just got my TRS Morimoto HID 880 fog kit with 35w / 5500k bulbs.

Trying to mentally install the kit (first).... Not sure where the "OEM input" plugs into??

Uh, yes..... I will be calling TRS for help.....
But I was thinking, to rig the harness, I might begin by installing the bulbs, and run from there, to see where / how to locate the cute little boxes -n- such.
The kit plugs straight into the harness , unplug your stock halogen 880 bulb and plug the hids directly into the plug that was hooked to the 880 bulb. I mounted my ballast (cut little box) on my frame horn with just zip ties
 
OP
OP
05Single

05Single

afraid of the dark
Joined
Feb 26, 2015
Posts
8,243
Reaction score
11,639

EDDIE03HOE

TYF Newbie
Joined
Dec 8, 2019
Posts
4
Reaction score
0
All of my lights are now LEDs. Did the 4 switchback mod with amber corner lights. All switchbacks light as DRL and parking/turn signals. Also used the Novita electronic flasher so no resistors are needed, and I previously did the diode modification so I have All-On-High. I like the result.

How did you do this I need this for my 03 tahoe
 

camaroz1985

Full Access Member
Joined
Apr 15, 2015
Posts
240
Reaction score
122
How did you do this I need this for my 03 tahoe

You need to replace the DRL socket with a 3 wire socket like the turn signal/parking light. Then basically tie the wiring together for both bulbs. You need to put diodes on the DRL power wire, and parking light power wire to prevent the parking lights from being on at all times.
 

HELLAbeefy

Member
Joined
Jan 20, 2014
Posts
41
Reaction score
20
Location
south louisana
Too many LEDs and too much free time

Tail lights are the newest dress up

IMG_20200912_211734.jpg IMG_20181024_162059.jpg IMG_20180225_182308.jpg
 

Forum statistics

Threads
137,686
Posts
1,989,603
Members
102,687
Latest member
JohanZ
Back
Top