Ok before I go pick these up.. the Silverado mirrors for 2002-2004 are the same as our NBS mirrors aren’t they..?
What did you do to your NBS GMT800 Tahoe/Yukon Today?
- Thread starter vwbeaner
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
I think the Dorman one is a different design, same amount of area. The one I retrofitted in my 08 Silverado bends to the side as it slides up. These are in 2 parts so you don’t have to bend them, just slide 1 up and push it back then slide the second one up. I’ll bet the regular 2piece filters fit the Dorman retrofits but Dorman made theirs different so you are led to believe you have to buy their filters, which is ingenious marketing imo.
Tonyrodz
Resident Resident
Installed my new belt today,
and also messed with the new idler. I used a small flat washer instead of the stock large concave washer. Redipped my grill
Since it was starting to look crappy with the old dip on it. Fixed my amp wire, since I kept having issues with it. I hope my belt stays out this time.
Found this--
Lol. Who can resist a monkey giving the finger and holding his nuts??
Since it was starting to look crappy with the old dip on it. Fixed my amp wire, since I kept having issues with it. I hope my belt stays out this time.
Found this--
Haha! Awesome. Hope the new belt stays put Tony.
Tonyrodz
Resident Resident
Thx Sam, me too. Ever get your Silverado mirrors figured out? Getting them?
Thinking so. Not 100%. They don’t have the turn LEDs. Sooo..
I just wanted to make sure they’re ok for our rigs too.
Not me but the Portland Police kinda overloaded one of theirs yesterday. These stupid demonstrators aren’t even from here. I don’t understand why they come to our city to do this shit.
95escahoe
Full Access Member
- Joined
- Aug 2, 2010
- Posts
- 5,162
- Reaction score
- 4,466
New alternator Friday. Today I buffed, detailed and gassed up. Ready for the week!
Sent from my iPhone using Tapatalk Pro
Nice choice on rims I’ve got the same on mine
Sent from my iPhone using Tapatalk
dszx13
Full Access Member
- Joined
- Apr 8, 2017
- Posts
- 262
- Reaction score
- 604
Not sure if I posted on here. But for awhile I’ve been debating about selling my Yukon. I already found a stock 5.3 to swap in the Yukon. Also have a pretty sweet project lined up to take its place and put my 6.0 in it. Anyways. Both are clean
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Splorg
Full Access Member
What did I do with my Yukon today?
Proved to my Wrangler-driving buddy that not only could I pull him out of Martin's Gap when his 4WD quit, I *could* traverse the obstacles he said I'd get stuck on because my "wheelbase is too long and there's not enough clearance with no lift."
Also, got it dirty, and held it on 3 wheels. All in "Auto 4WD".
Heh.
Proved to my Wrangler-driving buddy that not only could I pull him out of Martin's Gap when his 4WD quit, I *could* traverse the obstacles he said I'd get stuck on because my "wheelbase is too long and there's not enough clearance with no lift."
Also, got it dirty, and held it on 3 wheels. All in "Auto 4WD".
Heh.
915_Tahoe
Your GM Parts Specialist
scored a set of oe flares for the HOE
Reading what I wrote, it sounds like I’m one of these ********** racing through a construction zone.[emoji23] that’s not the case here, FYI, it’s a road widening project been going for a couple years, due to new homes in the area. The road sits untouched for months while they don’t work on it.
So Friday, I drove through the same road construction I’ve driven through for nearly a year now right up the street from my house. Unfortunately, someone decided to move the orange barrels around.. so I was going too fast through a tight section, and hit my passenger mirror on the road closed sign. I’m so pissed I did this. Mistakes happen, and I’m glad it’s minor, but still pissed off about it.
Ordered a new mirror glass and cap.. guess I’ll be able to try my hand at painting a bit sooner than I thought. At least I can experiment on a small piece now. I was planning on repainting the mirror caps anyway, since they’re small, and pretty faded compared with the rest of the truck.
Now, just waiting for my paint and plastic adhesion promoter to arrive..
So Friday, I drove through the same road construction I’ve driven through for nearly a year now right up the street from my house. Unfortunately, someone decided to move the orange barrels around.. so I was going too fast through a tight section, and hit my passenger mirror on the road closed sign. I’m so pissed I did this. Mistakes happen, and I’m glad it’s minor, but still pissed off about it.
Ordered a new mirror glass and cap.. guess I’ll be able to try my hand at painting a bit sooner than I thought. At least I can experiment on a small piece now. I was planning on repainting the mirror caps anyway, since they’re small, and pretty faded compared with the rest of the truck.
Now, just waiting for my paint and plastic adhesion promoter to arrive..
Last edited:
HiHoeSilver
Away!
Love the Tahoe naysayers. ALWAYS get proven wrong.
I just spoke to the fine folks at Elite Engineering about my catchcan that I'm spending way too much money on. It's just something that I want to be different than what everybody else runs, and my engine bay looks nice so I want to make it nicer. Anyway, I had already talked them into powdercoating it red instead of their standard black so it will be a one-off and they agreed to do that for a nominal charge. But then they mentioned that send it out to laser engrave their logo and I thought it wouldn't hurt to ask if they can add "THE BEAST" to the engraving and they said they can get that done probably for free. Pretty cool. I did mention that I will be showing it off here on the forum. Here's my engine bay, and the style of catchcan. It will also have a clean side separator and all black braided hoses with AN fittings.
I'll update after I get it installed.
ivin74
05 NBS Nali
I just spoke to the fine folks at Elite Engineering about my catchcan that I'm spending way too much money on. It's just something that I want to be different than what everybody else runs, and my engine bay looks nice so I want to make it nicer. Anyway, I had already talked them into powdercoating it red instead of their standard black so it will be a one-off and they agreed to do that for a nominal charge. But then they mentioned that send it out to laser engrave their logo and I thought it wouldn't hurt to ask if they can add "THE BEAST" to the engraving and they said they can get that done probably for free. Pretty cool. I did mention that I will be showing it off here on the forum. Here's my engine bay, and the style of catchcan. It will also have a clean side separator and all black braided hoses with AN fittings.View attachment 229021 I'll update after I get it installed.
Mark do you even drive the beast? The engine bay looks like show truck!
It’s my DD so yes. As in daily lol. It’s not always that clean but close. I keep the whole truck looking pretty much new inside and out.
It's not touching ground yet... they could of got a couple more on .. that's just burb in-service. [emoji106][emoji41]
Sent from my LG-H900 using Tapatalk
TheAutumnWind
Full Access Member
- Joined
- Jan 8, 2015
- Posts
- 3,254
- Reaction score
- 1,993
those things are nasty!
TheAutumnWind
Full Access Member
- Joined
- Jan 8, 2015
- Posts
- 3,254
- Reaction score
- 1,993
My Esky did not have them from factory I retrofitted and installed 2 filters.
My guess is that you get more filtration with better overall flow with more filter area. They use 2 seperate filters as thats the only way you could slip them into that slot i'd imagine.
I ordered the following items
https://www.amazon.com/gp/product/B01G5VHFW8/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 and
https://www.amazon.com/gp/product/B0010DW5ZO/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
when I did my retrofit.
Mine Are 2 years old. Probably due for a change.
Edit: Thinking about it the wife has complained about a musty smell lately and air flow isnt great. Ordered some new ones.
Last edited:
