Stang&Hoe
Member
Ok. Calling the shop today to order this setup. Please let me know if this sounds like it will work.
99 obs 4 door z71 hoe. Gas burner
315\75R16 BF Goodrich Mud Terrain KM2
Which equates out to a 35x12.50
And a premium lift system by Performance Accessories its a 5" lift.
Here it is.
http://www.4wheelparts.com/Lift-Kit...t.aspx?t_c=1&t_s=358&t_pt=9333&t_pn=PERPLS105
this will be going on the factory wheels for now.
The 285x75s that are on it now rub a bit at full steering lock on the control arms and if I'm not paying attention they tend to grab a bite of fender if the wheels are turned and I hit a firm bump.
A bit of rub is fine but not wanting to bust the truck up too much
I have already removed the cute little plastic valance from the front bumper. The chin spoilef I guess?
I haven't rubbed the fenders since a BFH rolled the edges quite nicely.
99 obs 4 door z71 hoe. Gas burner
315\75R16 BF Goodrich Mud Terrain KM2
Which equates out to a 35x12.50
And a premium lift system by Performance Accessories its a 5" lift.
Here it is.
http://www.4wheelparts.com/Lift-Kit...t.aspx?t_c=1&t_s=358&t_pt=9333&t_pn=PERPLS105
this will be going on the factory wheels for now.
The 285x75s that are on it now rub a bit at full steering lock on the control arms and if I'm not paying attention they tend to grab a bite of fender if the wheels are turned and I hit a firm bump.
A bit of rub is fine but not wanting to bust the truck up too much
I have already removed the cute little plastic valance from the front bumper. The chin spoilef I guess?
I haven't rubbed the fenders since a BFH rolled the edges quite nicely.