Rivieraracing
Full Access Member
That's cool, mine is an old off brand 2 way paging alarm and the remotes are about as much as I paid for this brand new autopage alarm off of Amazon!
What did you do to your NBS GMT800 Tahoe/Yukon Today?
- Thread starter vwbeaner
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
That's cool, mine is an old off brand 2 way paging alarm and the remotes are about as much as I paid for this brand new autopage alarm off of Amazon!
cybertek
Member
Fixed the rear heat and made the kids happy.
Replaced the controller module and both actuator motors.
Replaced the controller module and both actuator motors.
Physh1
Full Access Member
- Joined
- Jul 29, 2010
- Posts
- 773
- Reaction score
- 24
I'm ditching my LED tails after dealing with issue upon issue. Tired of them failing. Decided to go back to stockers with LED 3157's & candy them...so far this is where I'm at. Sanded at 400 grit after washing & have about 6 light coats of candy...
Washed & degreased...
Sanded with 400 grit...
Taped off the reverse area...
A few light layers of candy...
Removed the tape...time to let dry for 24 hours or so...
Tomorrow will be wet sanding & clearing...
Cameron
Washed & degreased...
Sanded with 400 grit...
Taped off the reverse area...
A few light layers of candy...
Removed the tape...time to let dry for 24 hours or so...
Tomorrow will be wet sanding & clearing...
Cameron
02 Burb
Full Access Member
Replaced the ignition coils, bank #3 was giving a misfire code. Seems to be running better now with no codes, ill probably end up replacing the spark plugs and wires as well. Mileage in the city went from 8 to 12mpg 
Installed the E-fans and fan controller.
bansil
Member
started a build thread http://www.tahoeyukonforum.com/forum/showthread.php?t=66176
going back outside now to work on her
going back outside now to work on her
Red_Raider
Full Access Member
I'm ditching my LED tails after dealing with issue upon issue. Tired of them failing. Decided to go back to stockers with LED 3157's & candy them...so far this is where I'm at. Sanded at 400 grit after washing & have about 6 light coats of candy...
Washed & degreased...
Sanded with 400 grit...
Taped off the reverse area...
A few light layers of candy...
Removed the tape...time to let dry for 24 hours or so...
Tomorrow will be wet sanding & clearing...
Cameron
Looks great! Can't wait to see what they look like installed.
NCTyphoonKid
Full Access Member
- Joined
- Jan 3, 2011
- Posts
- 49,952
- Reaction score
- 15,601
Lookin good dude!!
