blatta1999
Full Access Member
- Joined
- Apr 11, 2017
- Posts
- 86
- Reaction score
- 21
How easy is it to add transmission temperature gauge?
HOW-TO: 03-06 NBS Gauge cluster LED conversion
- Thread starter ScottyBoy
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
treehan77
TYF Fiend
It was a 20 or so option when I sent my cluster off. If you haven't done that already you should consider it. By itself someone else may come in?
HiHoeSilver
Away!
What truck do you have?
blatta1999
Full Access Member
- Joined
- Apr 11, 2017
- Posts
- 86
- Reaction score
- 21
2005 chevy Tahoe lt
HiHoeSilver
Away!
You would need to :
1. Open the cluster
2. Solder in a stepper motor
3. Change the gauge face
4. Add the needle
5. Get the cluster programmed
blatta1999
Full Access Member
- Joined
- Apr 11, 2017
- Posts
- 86
- Reaction score
- 21
Took my gauge cluster out today and replaced the stepper motor on the speedometer. All went well and worked as it should. Now I have on order bulbs and the rest of the motors to go ahead and completely rebuild the gauge cluster. Thanks for the valuable info on here!
HiHoeSilver
Away!
Lol. Still haven't done my own. Gathering parts, but have a few things ahead of it on the list...
blatta1999
Full Access Member
- Joined
- Apr 11, 2017
- Posts
- 86
- Reaction score
- 21
Is there a bulb that goes to the mileage readout and the gear readout(PRND321)? Both of mine are dim and I am wondering if I swap all bulbs to led will that take care of it?
treehan77
TYF Fiend
Search prndl reflow. The bulbs probably aren't the culprit, a bad solder joint is.
