Wiring for added interior accessories

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

JCSFPD

TYF Newbie
Joined
Jul 19, 2022
Posts
4
Reaction score
2
I want to add an interior accessory powered from the bus bar located at the battery. Does anyone know of an easy way to feed a wire through the firewall?
 

blondie70

Member
Joined
Nov 21, 2023
Posts
89
Reaction score
127
Ham radio ? I ran an antenna wire down thru the passenger side hood hinge..down to the rubber plug with the door wires. Thru with the door wires and into the interior. The door has room and does not close on the wire. This was for an antenna for my stock radio, which has the antenna in the rear side window....useless for me...Now my radio works super.
Good Luck
 

K2 Kaiju

Full Access Member
Joined
Feb 17, 2015
Posts
649
Reaction score
645
Location
The Depths
Last 2 generations had a plastic cap in front of the passenger seat under the carpet about were your right foot would sit. It was a great pass through for an amplifier power wire to the back. I drilled through it and added a rubber grommet...
 
Last edited:

Forum statistics

Threads
129,244
Posts
1,812,762
Members
92,349
Latest member
Ihaveatahoetoo
Top