My security system is not letting me start my truck. This has been happening for a while now so I get out and use my key and get back in and wait and then it starts, now I got my remote working again after 2 years, now it is way bad and this morning it won’t even start at all. So my husband disconnected the battery to re-set, and that still didn’t work… what do I do to turn this off, I don’t even care to have it on? HELP!!!!!
security system not letting me start my truck...???
- Thread starter Sarahr26
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
OmarR
Full Access Member
What year is your truck?
Do you have an aftermarket security system? If so, what make/model?
When you attempt to start the truck, does the starter crank or do you get nothing?
Do you have an aftermarket security system? If so, what make/model?
When you attempt to start the truck, does the starter crank or do you get nothing?
GeneralNoobzor
Full Access Member
Put the key in the on position, don't start the car.
Put on the E-Brake
Put the shift lever all the way down.
Put the steering wheel all the way down.
Remove the dash. (Pulls off)
Now there is a piece under the steering wheel. Has two 8mm or 7mm bolts, unscrew.
There should be a black box in their somewhere. That is the security system.
Unplug. Enjoy having no alarm...
Put on the E-Brake
Put the shift lever all the way down.
Put the steering wheel all the way down.
Remove the dash. (Pulls off)
Now there is a piece under the steering wheel. Has two 8mm or 7mm bolts, unscrew.
There should be a black box in their somewhere. That is the security system.
Unplug. Enjoy having no alarm...
