Rear hatch spoiler

[LsHart]

Anyone have or know where a rear glass or a spoiler from a 05 caddy is for sell?

 

[Joseph Garcia]

I'd probably start on eBay.

 

[LsHart]

Worth a try A!

 

[LsHart]

Man ever so often, I find color matching parts.

 

[adventurenali92]

Anyone have or know where a rear glass or a spoiler from a 05 caddy is for sell?

FYI…. The photo you posted is of a GMT900 Tahoe/yukon spoiler model to fit on a GMT800.

 

[LsHart]

Yup, that's why I'm posting to find one.

 

[adventurenali92]

Yup, that's why I'm posting to find one.

So you’re trying to do the GMT900 spoiler? Why do you need the 2005 Escalade glass then?

 

[LsHart]

Doesn't have the plastic trim. And I wanna keep mine as a back up.

 

[LsHart]

The pic I posted was just for reference. 05 Caddy and or tahoe that ran the rear spoiler is what I'm looking for.

 

[TheAutumnWind]

The pic I posted was just for reference. 05 Caddy and or tahoe that ran the rear spoiler is what I'm looking for.

My 05 doesn't have a spoiler. I don't think any of them did.

 

[Doubeleive]

tons of 05 esky 3rd brake light repops out there, used glass it out there just be sure the defroster is intact, often their all messed up.

 

[LsHart]

Just for reference

 

[adventurenali92]

Just for reference

That’s the Escalade EXT third brake light. FYI…. It DOES NOT fit the SUV hatches. It mounts on where the sail panels meet the midgate setup on the EXT. the bottom side of is not at all shaped like the SUV setup for the tailgate style hatch glass.

 

[LsHart]

Yeah, these are just pics of what I'm looking for. As in what anyone has that will fit that looks like the pics I'm posting. But it's good though. I found what I was looking for since this post. The same truck I got the pillars off of.

 

[adventurenali92]

Yeah, these are just pics of what I'm looking for. As in what anyone has that will fit that looks like the pics I'm posting. But it's good though. I found what I was looking for since this post. The same truck I got the pillars off of.

Yeah and I’m saying that that’s not a good reference pic for the thread since it won’t work for an SUV spoiler swap.

 

[LsHart]

This piece.

 

[LsHart]

Sorry I wasn't specific.

 

[adventurenali92]

Yeah that’s the correct SUV Escalade third tail light base that will work on all the GMT800 Escalade hatches whether it’s a standard wheel base or ESV model. And the 2005/2006 hatch without the urethan trim surround is definitely the better of the two like you said. I had originally pulled my 2006 Yukon hatch without the trim off when I did the Escalade third tail light swap and put a 2094 hatch on. The urethane trim started to eventually delaminate from the glass which is where the lift supports mount. Pulled it and JB welded it down and that held perfectly. But then scored a good shape 2005 Escalade hatch without the trim and been running that since with no issue.

 

[LsHart]

Had one found and got scared and didn't get it. So someone else got it.

 

[adventurenali92]

Had one found and got scared and didn't get it. So someone else got it.

That’s a bummer. Might take a bit but you’ll find one.