Pls help, signal won't stop clicking

[electro]

No flashing lights just the annoying sound all the time.

I removed lower dash section and replaced flasher and that didn't help.

What's causing my flasher to click all the time!?

Thanks for looking.


Sent from my iPad using Tapatalk

 

[electro]

Click click click click


Sent from my iPhone using Tapatalk

 

[YukonXL04]

I would have figured the flasher to cause that. are you sure you picked the right flasher module? I believe there are 2, one for blinkers the other for hazards.

 

[electro]

Pretty sure. I may try else where at a different store. The terminals matched up perfect and it didn't click with the switch/ relay removed.


Sent from my iPhone using Tapatalk

 

[Mechahead]

I have had a few that were the multifunction switch. It was real common on other gm models.

 

[electro]

I wonder if they gave me the wrong one.


Sent from my iPhone using Tapatalk

 

[Mac]

Could be the turn signal switch itself that's bad ....

 

[Big Buttons]

turn signal switch or hazard switch

 

[electro]

turn signal switch or hazard switch

Both?


Sent from my iPhone using Tapatalk

 

[01ssreda4]

Check your blinker fluid.

 

[electro]

The flasher just constantly blinks. No hazards or blinkers are on.

If I need to signal or use hazards they work as required.


Sent from my iPhone using Tapatalk

---------- Post added at 06:20 PM ---------- Previous post was at 06:19 PM ----------

Check your blinker fluid.

What fluid do you use? Do you have a right up?


Sent from my iPhone using Tapatalk

---------- Post added at 06:21 PM ---------- Previous post was at 06:20 PM ----------

Where is the turn signal switch located?


Sent from my iPhone using Tapatalk

 

[ercbrooks]

I have this same problem on my 96 Z71 pickup

 

[electro]

Hmm. I haven't fixed mine yet. It's less annoying now but still in need of repair.