Please help!! Driveshaft Question

[mikecw99]

I have a 99 Tahoe 2door 2wheel drive does anyone know what other yrs driveshafts are interchangable with this one the one I have is destroyed. I know that the one i have is 47" from weld to weld.

 

[GMC Yukon]

Go to CAR-PARTS.COM Enter your info and youll find the one you need at a great deal!

 

[mikecw99]

I did GMC and so far every one I have found has been the 37" which Im guessing is the 4x4 but they list it as 2wheel

 

[GMC Yukon]

You do know that the front is a split shaft... It slides in and out....

 

[darin95yuk]

looks like a tape measure and a junk yard job... im sure any tahoe with a 4l60e or 700r4 which are the same one electric one not anyways it should be the same length hope this helps you out!

 

[GMC Yukon]

Opps sry. I would think that the back would be the same as a 4x4.... But i`m not sure!

 

[mikecw99]

but im looking for the rear shaft for a 2 wheel drive

---------- Post added at 06:59 PM ---------- Previous post was at 06:58 PM ----------

yeah been there already and the 4 doors are longer I may just have to get one and have it cut down

---------- Post added at 07:00 PM ---------- Previous post was at 06:59 PM ----------

nope its 10" shorter

 

[bowtiefreak]

Custom shaft is an option. Tom Woods did mine, about $450 for a CV shaft. A standard shaft should be less

 

[mikecw99]

Bowtie I wish that was an option but mpney is tight and I need to get back on the road yesterday I think im just going to have to get a 4 door shaft and have it cut down. thanks

 

[mikecw99]

Well I got my driveshaft yesterday had to get a 4 dr one and have it cut down but works great

 

[bowtiefreak]

Cool. I should have mentioned that, my bad. Costs about $100 to have them cut down and balanced

 

[mikecw99]

Blumenthals it was $100 to cut ,balance and new U-Joints and paid $50 for the driveshaft so It came out good