lower rear a inch or inch half cheap?

[tilghman]

anyone know a way to lower the back so it will sit level But i plan on putting a 4 inch suspension lift on it when the money comes so i need it to reversable.A cheap easy would be in a perfect world but hey you never know!!

 

[TheFuzz]

If you're going to lift it eventually anyway, why lower the rear as opposed to just lifting the front by cranking the torsion keys up a little? There is no way to lower the rear without getting shorter springs. Adjusting your torsion bars so that the front raises up a little is a far better option, and it's free.

 

[tilghman]

lift

If you're going to lift it eventually anyway, why lower the rear as opposed to just lifting the front by cranking the torsion keys up a little? There is no way to lower the rear without getting shorter springs. Adjusting your torsion bars so that the front raises up a little is a far better option, and it's free.

what tools are required to crank these?

 

[Eagle]

18mm socket on mine.

I put a mark on my socket wrench so I could count the turns.