Looking to lower my 05 escalade

[Who's ur caddy]

Just want to know what kind of kits are out there and which one is better

 

[magicbus]

I'd go with Tony's 4-5/5-6 kit if it were me. I'm on a DJM 3/5, I love it but it's not low enough for me.

 

[Who's ur caddy]

I'd go with Tony's 4-5/5-6 kit if it were me. I'm on a DJM 3/5, I love it but it's not low enough for me.

That sound kinda low especially with the bad streets here in MA. How about the 2/3 drop? Anybody else with inputs?

 

[NathanJax]

My old 04... low low...

Tony sells 2/3, 2/4, 3/5, etc. Whatever height you want to go down...

 

[Who's ur caddy]

My old 04... low low...

Tony sells 2/3, 2/4, 3/5, etc. Whatever height you want to go down...

wow! Sweet ass looking ride!!! What set up did you go with and how low?

 

[josueh95]

^^^ man those rims look soo good on an nbs makes me want to get em even more and drop mine

 

[NORCAL SS]

just a heads up my 5-6 inch rear drop springs ride great. Ask anyone here. I can set up a kit using my 6 inch drop springs also for you to give you 4 inches

 

[NathanJax]

wow! Sweet ass looking ride!!! What set up did you go with and how low?

http://www.tahoeyukonforum.com/forum/showthread.php?t=4547

 

[magicbus]

That sound kinda low especially with the bad streets here in MA. How about the 2/3 drop? Anybody else with inputs?

They can't be worse than Wichita Falls' roads. To put this into perspective; My burb sits about even with my friend's new Challenger ground clearance wise. The Challenger's wheelbase is only 9" shorter than a Suburban. In other words, a 3/5 burb is perfectly driveable on our crappy roads so a shorter wheelbased Yukon/Tahoe/Escalade should be okay. I drive mine like I stole it and Have yet to bottom out on anything. My tires rub slightly at times but I'm about to replace them with a shorter tire so I can get ready to go lower

just throwing that our there to keep your options open

 

[NORCAL SS]

yeah 3/5 still leaves a lot of ground clearance especially on 305 35 24 or 285 45 22

 

[Who's ur caddy]

Anybody got pics with a 2/3 drop?

 

[NORCAL SS]

Heres a customers truck I did recently. decranked front keys and did the rear belltech kit

 

[skbishop90]

Anybody got pics with a 2/3 drop?

Here's my 06' Hoe with my boat behind it. I have a 2/3 drop with 20's. Rides great and never bottoms out, even with the boat. Id recommend this for you. Seems to me you don't want to go too low because of the roads. This would be perfect. And if you go Bell Tech, I would recommend the drop spindles rather than the torsion keys. Ask Tony for a price. Very reasonable.

 

[lowAZhoe]

this is my wifes old escalade 2/3 on 295/35/24

 

[Who's ur caddy]

this is my wifes old escalade 2/3 on 295/35/24

Nice!! What setup did you go with?

 

[NORCAL SS]

if you only want to do 1 inch get keys. For 2 inches get spindles ride will be much better.

 

[Who's ur caddy]

Thanks for the info guys!!

 

[lowAZhoe]

Nice!! What setup did you go with?

That one was a mcgaughys kit. Belltech setup is the same

 

[Who's ur caddy]

this is my wifes old escalade 2/3 on 295/35/24

What kit did you use ?