Wylie_Tahoe
Full Access Member
- Joined
- Nov 5, 2018
- Posts
- 169
- Reaction score
- 154
So over the summer, I wondered why the rear AC was mediocre. As we moved into winter, I noticed I had no rear heat. Pulled the panel off and fount this. Bend motor removed, hole cut out in air box and screw run through blend door holding it in the cold position. Gotta love backyard hacks.
Short term, I secured the blend door in the heat mode, and covered the hole better with some real duct tape. Long term, ill install a new blend motor and glue a piece of ABS over the hole once I know its working
Short term, I secured the blend door in the heat mode, and covered the hole better with some real duct tape. Long term, ill install a new blend motor and glue a piece of ABS over the hole once I know its working