Front license plate bracket on denali

[pwtr02ss]

Dealer already installed it so I'm wondering if it just goes through the "black" plastic part of the bumper or if it goes through the painted part. The plastic insert can be replaced.

https://www.gmpartsdirect.com/auto-...ine/body-cat/bumper-and-components-front-****

number 9 in the diagram

 

[Goodinblack]

Just put this tag on it.

Sent from my SM-N960U using Tapatalk

 

[dbbd1]

Just put this tag on it.

Sent from my SM-N960U using Tapatalk

Where can I get one? I'd do it! Hell, everyone calls me an a$$hole anyways...

 

[dbbd1]

Dealer already installed it so I'm wondering if it just goes through the "black" plastic part of the bumper or if it goes through the painted part. The plastic insert can be replaced.

https://www.gmpartsdirect.com/auto-...ine/body-cat/bumper-and-components-front-****

number 9 in the diagram

Through the upper, bumper part.

 

[pwtr02ss]

Through the upper, bumper part.

like the painted part?

 

[dbbd1]

Yup.

 

[Goodinblack]

Ouch

Sent from my SM-N960U using Tapatalk

 

[ChrisYukon]

I took mine off - it only went through the black part, so the holes aren’t noticeable enough for me to replace the part. Thanks for the link, though - I’ll consider it. If it went through the paint, it must look weird - someone installed it wrong.

 

[adventurenali92]

My client with a 2015 Denali, the plate holder goes through the painted part as well.

 

[pwtr02ss]

Thanks for the info guys. I will know on saturday

 

[SARNCAN]

Mine goes through both actually, the pumper (painted part) and the blacked (plastic part)
I new about it lately because I’ve replaced the license plate bracket to the long version for the rectangular license plate instead of squared. Unfortunately, the previous holes are visible on the pumper

 

[dbbd1]

Mine goes through both actually, the pumper (painted part) and the blacked (plastic part)
I new about it lately because I’ve replaced the license plate bracket to the long version for the rectangular license plate instead of squared. Unfortunately, the previous holes are visible on the pumper.

You must be overseas (or we are, depending upon how you want to look at it).

Bumperplugs.com

 

[pwtr02ss]

Just FYI, in my case, the holes are only drilled through the black plastic part, not the painted part. The screws for the license plate its self, did poke a tiny little place in the paint. Not enough to even notice.

This is on 2019 yukon. It appears they have a few variations of mounts throughout the years. I'm very thankful I don't have to have the hideous thing on the front of my truck though.

 

[SARNCAN]

You must be overseas (or we are, depending upon how you want to look at it).

Bumperplugs.com

I am actually

 

[Sam Harris]

Just put this tag on it.

Sent from my SM-N960U using Tapatalk

Bwaaahahaahahahaa!

 

[Timothy Sargent]

Just FYI, in my case, the holes are only drilled through the black plastic part, not the painted part. The screws for the license plate its self, did poke a tiny little place in the paint. Not enough to even notice.

This is on 2019 yukon. It appears they have a few variations of mounts throughout the years. I'm very thankful I don't have to have the hideous thing on the front of my truck though.

Any chance you can post a pic of how the front area looks after removing? Like I'm trying to figure out how noticable the front holes will be after removing.

 

[Ghost10]

Any chance you can post a pic of how the front area looks after removing? Like I'm trying to figure out how noticable the front holes

 

[pwtr02ss]

Any chance you can post a pic of how the front area looks after removing? Like I'm trying to figure out how noticable the front holes will be after removing.