cruise doesn't work with new led tails

[Big Motion]

just installed led tails i ordered off of ebay, then i found out that my cruise control quit working, i've heard about this happening but i'm not sure if there is a fix for it. any ideas???

 

[Abstrastic]

who did or order them from?

it is your brake lights.

 

[NoPh33rRaCiNg]

You needed to buy the kit from x3racing with the resistor built in

 

[BlueTahoe2001]

You needed to buy the kit from x3racing with the resistor built in

Link please? Getting ready to order some in the next week and want to make sure I get the right ones.

 

[chistoso]

Link please? Getting ready to order some in the next week and want to make sure I get the right ones.

http://cgi.ebay.com/ebaymotors/CHEVY-GMC-SUBURBAN-TAHOE-RED-CLEAR-FULL-LED-TAIL-LIGHTS-_W0QQcmdZViewItemQQfitsZModelQ3aTahoeQQhashZitem5195c0f06bQQitemZ350404800619QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories

 

[Big Motion]

You needed to buy the kit from x3racing with the resistor built in

well i didn't........ is there anything i can do now??

---------- Post added at 09:44 AM ---------- Previous post was at 09:36 AM ----------

who did or order them from?

it is your brake lights.

http://cgi.ebay.com/ebaymotors/00-0...ptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories



what can i do to fix the problem?

 

[OmarR]

You can add resistors. Google "load equalizers".

Just be careful where you install them because they get really hot.

 

[markesq]

I am in the same boat. Hate to throw away $119 lights.

 

[markesq]

Any idea which load equalizers to get?

 

[markesq]

I am going to see if the ones at the bottom of this page work.

http://autolumination.com/3157_led_selection_troubleshooting.html

 

[markesq]

Did not work

 

[Joe1129uscg]

Not sure if it was posted in this thread anywhere but GM has a flasher made for LED bulbs in 03-06 trucks part# 10383322 it corrects hyper flash and cruise control

The great thing about this is it installs in the place of the old flasher and you dont need to worry about it getting hot or cutting up wires to install resistors!

Hope this helps!

 

[markesq]

Thanks. I will give it a try. I don't have the hyper flash, but I hope it cures the cruise.

 

[Ced]

return them if it hasnt been 30 days. then get the right ones. the money you gonna spend on da resistors, that can be da money to ship them bck. IMP

 

[markesq]

Already bought the resistors, that did not work. Sent email to the X3racing to make sure their lights will work. Will ship mine back and order the flasher too.

These are the ones I am looking at..

http://cgi.ebay.com/ebaymotors/ws/e...0694475036&viewitem=&sspagename=STRK:MEWAX:IT

 

[bkboatnsleds]

Already bought the resistors, that did not work. Sent email to the X3racing to make sure their lights will work. Will ship mine back and order the flasher too.

These are the ones I am looking at..

http://cgi.ebay.com/ebaymotors/ws/e...0694475036&viewitem=&sspagename=STRK:MEWAX:IT

I have these - no issues at all.

 

[markesq]

Thanks!

 

[markesq]

Well, the flasher did not solve the problem either. Went and ordered the X3racing tails.

 

[markesq]

Finally. Ordered the lights off of EBAY by X3racing. Those worked. CC is good to go. Sending the others back.