Barn door removal on 1997 2 door

[Tbruz]

Has anyone successfully used this type of tool to remove/replace the barn doors?

Pardon Our Interruption...

Thanks
Tbruz

 

[exp500]

A 10 mm socket works good for me. Need to change pins, grind off head and drive out. Hope it's an easy one.

 

[budman]

Had to replace the barn doors on mine after getting rear ended. Couldn’t bring myself to spend the money on that tool so I made my own out of half inch steel. The pins were rusted, almost like welded all the way through so the tool just spread out and eventually broke. After several hours of beating, hammering, and cussing, finally ended up having to drill one of them out. Good luck with it. It sucked