AC Control Bulbs

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Big Tap

Full Access Member
Joined
May 8, 2009
Posts
118
Reaction score
1
Location
Houston, TX
Does anyone know what bulbs go in the AC controls for an '02? I have one out and just want to replace the bulb. I'm not looking to go LED, just want to get the bulb number so I can solder another one in.
 

thehoe92

fo sho
Joined
Jun 19, 2009
Posts
1,605
Reaction score
13
Location
The916
I have the dual climate and the left control light is out.. damn subs aren't easy on the lights haha!

I don't know if its a bulb or not might just be a little light soldered to the board

I need to take mine apart and look at it..
 

vatahoelt

Full Access Member
Joined
Jun 1, 2009
Posts
1,015
Reaction score
13
Location
NoVa
it's a little tiny bulb. let me see if i can find the link to the best replacement for them.
 
OP
OP
Big Tap

Big Tap

Full Access Member
Joined
May 8, 2009
Posts
118
Reaction score
1
Location
Houston, TX
Took it apart and it's definitely a little bulb that is soldered in. Went to Radio Shack to find something that would work and everything I've tried seems to be a little dim. Might just go see my buddy at the wrecking yard and get an entire new one. He probably wouldn't charge me more than $10 and it would be worth my time and effort to just get a new one I think. If anyone else has any other ideas though, I'm all ears. I'm not down with a full LED conversion though. Getting ready to sell the rig.
 

ScottyBoy

Full Access Member
Joined
Jun 27, 2010
Posts
2,687
Reaction score
2,041
Location
Shreveport, La
I have like 3 or 4 bulbs lying around from when I did my LED conversion.
The one on the left is the stock AC panel bulb.
DSC00008-2.jpg
 

gmtk

Member
Joined
Sep 11, 2010
Posts
44
Reaction score
5
I just spent 5 hours last night working on mine. I ordered a used AC unit from ebay then soldered all the bulbs out from the used unit. If you know how to solder it's not that hard but takes a lot of patience (which I don't have). I fixed all but one burned out bulb and I think the circuit board is bad on the one bulb.

But after seeing some of the LED conversions, I'm thinking that's the way to go.

And I spent a month trying to find the replacement bulbs ---- couldn't find them anywhere.
 

Rivieraracing

Full Access Member
Joined
May 2, 2009
Posts
3,810
Reaction score
82
Location
Oregon
Here's the bulb info to buy them from Radio Shack, I just did mine yesterday and they look awesome!! A tad brighter than the others but I did all 4 buttons because they were all out and they look great and don't stand out from the others much!! They are physically identical to the stock ones!

Radio Shack# 272-1154

12V
50mA
.12MSCP (light output)
T-1 (bulb type)
Bi-pin (base type)

They were 2 bucks a piece from there and super easy to solder in!!

Good luck and post up your results of the swap out when you guys do them!!
 

Dryfly

Member
Joined
Dec 30, 2012
Posts
47
Reaction score
2
Here's the bulb info to buy them from Radio Shack, I just did mine yesterday and they look awesome!! A tad brighter than the others but I did all 4 buttons because they were all out and they look great and don't stand out from the others much!! They are physically identical to the stock ones!

Radio Shack# 272-1154

12V
50mA
.12MSCP (light output)
T-1 (bulb type)
Bi-pin (base type)

They were 2 bucks a piece from there and super easy to solder in!!

Good luck and post up your results of the swap out when you guys do them!!

I know that this is an old post but I have a contol unit with a few dead bulbs. Are these Radio Shack bulbs for the three buttons along the bottom (A/C, Fresh/Resirc Air and Rear defrost), ir at the top to illuminate the knobs (temp and blower speed)?
 

Rivieraracing

Full Access Member
Joined
May 2, 2009
Posts
3,810
Reaction score
82
Location
Oregon
I know that this is an old post but I have a contol unit with a few dead bulbs. Are these Radio Shack bulbs for the three buttons along the bottom (A/C, Fresh/Resirc Air and Rear defrost), ir at the top to illuminate the knobs (temp and blower speed)?

Dang, that was a long time ago I barely remember! I'd say it's the buttons on the bottom since I said that all 4 buttons were out but that would be a guess! If I remember right, that assembly wasn't hard at all to take apart so I'd take it apart and see if I'm right or not, for a couple bucks it's worth just taking a look!
3 1/2 years and those bulbs are still going strong!
 

Dryfly

Member
Joined
Dec 30, 2012
Posts
47
Reaction score
2
Dang, that was a long time ago I barely remember! I'd say it's the buttons on the bottom since I said that all 4 buttons were out but that would be a guess! If I remember right, that assembly wasn't hard at all to take apart so I'd take it apart and see if I'm right or not, for a couple bucks it's worth just taking a look!
3 1/2 years and those bulbs are still going strong!

Thanks for replying. I'll check it out.
 

dougo

Member
Joined
Aug 1, 2009
Posts
45
Reaction score
23
Location
Raleigh
What a pain in the ass well it appears all the little bulbs in the truck are 3mm 12v 80mm so if you order them order a bunch
search ebay for gm light bulbs you can get 50 for 10 bucks or so also you can find the blue covers
the bulbs fit the radio , instrument cluster , one vender said any thing that lights up 90% sure they are also work in the little switched on the steering wheel
get a good soldering iron
 

mooman

Member
Joined
Jan 16, 2014
Posts
76
Reaction score
25
Location
Saint Paul
What a pain in the ass well it appears all the little bulbs in the truck are 3mm 12v 80mm so if you order them order a bunch
search ebay for gm light bulbs you can get 50 for 10 bucks or so also you can find the blue covers
the bulbs fit the radio , instrument cluster , one vender said any thing that lights up 90% sure they are also work in the little switched on the steering wheel
get a good soldering iron

All of them? Radio, AC unit, AWD switch? Headlight switch? Because I have been tempted to replace all the bulbs, but am afraid that they are all different sizes.
 

Forum statistics

Threads
138,122
Posts
1,999,697
Members
103,046
Latest member
HeavyHoe03

Latest posts

Back
Top