2015 tahoe ac

[Weasel]

I have a 2015 tahoe that the ac quit cooling. My service guy said that the solenoid on the compressor was not getting a signaI from the controls.. I was told to replace the controls and have it programmed. The hvac control was programmed along with the bcm for the hvac controls. After this it's still not cooling. Has freon, compressor clutch is engaged. Any one seen this before. Thanks

 

[OR VietVet]

Are you sure the blend doors are opening to allow a/c? When you say it quit cooling, are you saying that it was then all of a sudden you had no a/c or was it gradual?

Welcome to the forum.

 

[Weasel]

Are you sure the blend doors are opening to allow a/c? When you say it quit cooling, are you saying that it was then all of a sudden you had no a/c or was it gradual?

Welcome to the forum.

Over night.

I have a 2015 tahoe that the ac quit cooling. My service guy said that the solenoid on the compressor was not getting a signaI from the controls.. I was told to replace the controls and have it programmed. The hvac control was programmed along with the bcm for the hvac controls. After this it's still not cooling. Has freon, compressor clutch is engaged. Any one seen this before. Thanks

It worked the night before and quit the next morning

 

[Tahoen]

I have a 2015 tahoe that the ac quit cooling. My service guy said that the solenoid on the compressor was not getting a signaI from the controls.. I was told to replace the controls and have it programmed. The hvac control was programmed along with the bcm for the hvac controls. After this it's still not cooling. Has freon, compressor clutch is engaged. Any one seen this before

I have a 2015 tahoe that the ac quit cooling. My service guy said that the solenoid on the compressor was not getting a signaI from the controls.. I was told to replace the controls and have it programmed. The hvac control was programmed along with the bcm for the hvac controls. After this it's still not cooling. Has freon, compressor clutch is engaged. Any one seen this before. Thanks

Well, if the dealer says you have pressure there's no leaks the compressor is engaging you might want to look at the blend door. I just replace mine, here's a link to a video I found,

Here's a pic from this past weekend replacing it. Lol