04 Tahoe temp control problems

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Jeffery Thurman

TYF Newbie
Joined
Aug 19, 2020
Posts
1
Reaction score
0
Have a 04 Tahoe, auto temp control. Blend door actuator for drivers side was clicking and would not switch from cold to hot. Replaced actuator, recalibrated by pulling 10 amp HVAC fuse, waited a minute, replaced turned truck on for 2 minutes for actuators to sync. Still won't switch from cold to hot. So ordered another actuator repeated all steps, still actuator won't turn. Anyone experience this issue? Even plugged another actuator that I know was good in just to check and it won't turn at all
 

Doubeleive

Wes
Supporting Member
Joined
Nov 7, 2017
Posts
30,571
Reaction score
48,061
Location
Stockton, Ca.
Have a 04 Tahoe, auto temp control. Blend door actuator for drivers side was clicking and would not switch from cold to hot. Replaced actuator, recalibrated by pulling 10 amp HVAC fuse, waited a minute, replaced turned truck on for 2 minutes for actuators to sync. Still won't switch from cold to hot. So ordered another actuator repeated all steps, still actuator won't turn. Anyone experience this issue? Even plugged another actuator that I know was good in just to check and it won't turn at all
did you use the correct actuator? it has to be a 100% part match, others will fit and have the same pins but they wont work at all.
 

PNWYukon

Full Access Member
Joined
May 13, 2015
Posts
321
Reaction score
250
Location
Olympia, WA
Screen Shot 2020-08-24 at 6.39.45 PM.png

Check for proper voltage.
 

Forum statistics

Threads
137,805
Posts
1,992,592
Members
102,792
Latest member
Hodmjstone
Back
Top