03' Yukon Body Drop

[BlizzardX23]

Your truck is clean looking either way...no matter what the measurments are...

The best way to measure body drop in rear is to measure where bottom of hatch sits at stock height...then measure again with bottom of hatch on bumper...hold tape measure up in both pics, then compare

As for the isolators, maybe the person who owned the truck before you put some aftermarket isolators in the coils...which were thicker...then when you pulled them out....you got a significant amount of drop from it?

---------- Post added at 11:27 PM ---------- Previous post was at 11:21 PM ----------

And its ... I COULDNT care less..


because when you say "I COULD care less"...well, say it slow and think about what it means...


It means that you are able to care even less then you do right now...as opposed to saying "I couldnt care less" meaning..I can NOT care any less then I do right now..which means "I dont give a ****"




I never understood why people made that mistake? That would be like me saying "I could jump off a cliff and live" compared to "I couldnt jump off a cliff and live"

 

[TEXAS DEMON]

lmfao!!!!!!!!!!!!!!!!!!!!!!!!! man i needed that this morning.

 

[Modded]

Thanks for the English lesson Blizz, that was actually kind of funny now that you stated it, just like me and how I dsilike when people say things along the line of "Am so drunk" instead of "I am so drunk" or "I'm so drunk."
Or even worst, do you have 25 cent, instead of 25 cents.

 

[TEXAS DEMON]

shittttt that would be me sometimes.

 

[89 chevy]

Haha, Thanks blizz!

 

[BlizzardX23]

Thanks for the English lesson Blizz, that was actually kind of funny now that you stated it, just like me and how I dsilike when people say things along the line of "Am so drunk" instead of "I am so drunk" or "I'm so drunk."
Or even worst, do you have 25 cent, instead of 25 cents.

"am so drunk"....uhhh...wtf? that doesnt make any sense at all....people say that? how the hell does someone forget the massive word "I"?????

That doesnt even make sense in slang...maybe they are saying "Im so drunk"...but its slurred? Im hoping thats the excuse...

and lol @ the "cent"
You've got Curtis Jackson to thank for that one!
(50 Cent)

Haha, Thanks blizz!

heh...no problem...wasnt bashin you or anything...I do that to everyone though...lol...even my professors

 

[89 chevy]

lol

 

[BlizzardX23]

Do you want some Poly Body Mounts? they would replace the metal cup that you put back between the frame and the body....you wont loose any drop...but you'll gain a lot better ride quality

 

[89 chevy]

Can you send me a pic of some?

 

[clean454]

Do you want some Poly Body Mounts? they would replace the metal cup that you put back between the frame and the body....you wont loose any drop...but you'll gain a lot better ride quality

did u do that yet?

 

[Modded]

"am so drunk"....uhhh...wtf? that doesnt make any sense at all....people say that? how the hell does someone forget the massive word "I"?????

Yeah its actually pretty common these days, just as much as the 20 cent over cents thing. But I have noticed people only use it when the statement is typed/written, not that they say it out loud verbally, because I would make fun of them if they did.

 

[MOBmentality]

"am so drunk"....uhhh...wtf? that doesnt make any sense at all....people say that? how the hell does someone forget the massive word "I"?????

Blizz... you say "SKOOL"

 

[BlizzardX23]

Blizz... you say "SKOOL"

at least it SOUNDS correct when spoken! LOL

and...because thats how it should be spelled anyways...sound it out!

but yes...I know...I look completely ignorant when I type "skool"...and "kool"

But in a proper e-mail, or msg to someone important, I type it out as school

---------- Post added at 07:50 PM ---------- Previous post was at 07:49 PM ----------

Good catch by the way MOB!

---------- Post added at 07:56 PM ---------- Previous post was at 07:50 PM ----------

Can you send me a pic of some?

I dont have any pics of them as of yet...I have to have them custom made

Energy Suspension has to make a custom mold and I have to order 100 of them at the least...

Our trucks use a set of 12...so I can provide myself and 7 other people with these if they are interested...for a price of course...

 

[89 chevy]

Haven't measured the rear of my Yukon after we removed the rubber isolators, and letting the springs settle back down. Here is a pic of the rear at 31 1/4in. Once I get the TBSS springs I will be under 31! Hell ya

 

[thehoe92]

good shit bro!

 

[89 chevy]

Thanks Kasey!

 

[Da90]

Yup no tire....Sir Michaels makes a good hidden hitch. Mine is still in the garage...


B

I'm not sure about nbs but I had a lowered 97 swb and when I put my roll pan on I also out on a spare tire relocate kit which just moved it back that way I could do the hitch and roll pan with a spare.

 

[89 chevy]

Well another pain in the ass about doing a body drop is that you cannot remove the factory catalytic convertor Y-Pipe unless you drop the tranny crossmember, or you have to unbolt the body and lift it up an inch or so. So if you want to put headers on, put it on before you body drop it.

 

[89 chevy]

Tucking, and sitting at 29"........

 

[BlizzardX23]

Is that the front fender? Its easy to get the front down...thats not a problem at all...in that was the BACK fender, THAT would be impressive