After resetting everything the code is pending a p1133 even tho check engine light hasn’t returned yet I also noticed EVAP In red at top blinking on the tool ..
I understand that there was a write up about avoiding the hassle of using resistors and just jumping wires on bcm. So what is the actual best way . I’ve even heard of people saying just the fuse alone works and there is no ill effect as long as you pull it with the battery disconnected first ...
Sorry for the ignorance posting 21 photos but Another thing that I’m not understanding I guess when learning a scan tool in detail , when I Leave global obd2 and choose Chevrolet oem enhanced it picks up 21 codes i can only post 5 at a time .. I don’t know if this just states possible codes...
At 1500 rpm parked the values change as shown 0.135-0.805 volts the ST Fuel fluctuates from -0.8 too 6.3
I’d really like to post a live graph on the data with a vid if I knew how. Mostly wanna rule out bad o2 or broken wires seeing as they both are a day old brand new installed on bank 1 side ...
I picked up a fairly ok 130$ obd 2 tool that does live data and graphing. I did a live Data graph video trying to understand the values i am seeing for voltage at idle and at 1500 rpm on bank 1 sensor 1 as well as the other banks but since p1133 is the only code I focused on that
Also did live...
Does anyone know where I can find the wire color chart/ diagram for the bank1 sens 1 o2 harness that point too which ones are the 12v and gnd and heater ? Specific on a 2001 4x4
Would this be tested with ignition forward or engine running
I have auto ride Tahoe 2001 LT “
I absolutely do not want or need it. I have plans to lower or lift the suv.And I don’t want that system. These shocks are old original and really worn and I don’t even suspect the autoride operates. I Want to swap to conventional shocks. What I don’t want is any...
This is a situation I can’t really figure out . I figured it may have been seen and narrowed down particularly with the 99-06 Tahoe 5.3
I bought the truck recently in excellent condition, well kept , engine has 254k but was redone all new upgrades gaskets new oil pump etc etc .. runs feels super...
Question when you did this did it require removing any part of the oem steel bumper? Usually just covers like Sonomas and GMC use just are the covers only and they go over the bumper brace and frame horns. And the oem Chevy bumpers get removed. Is this the same for full size gmt 800s?
What did...
I'm in this situation as well. I just got a 2001 Tahoe from Georgia extremely clean "
Non Bose ' everythings been left alone aside from the jvc single din radio. And there's a Sony explode 8" sub In the stock location. The guy I got it from said he never did the sub work and it's been there. It...
In the case of The bezel style differences that will end up making no difference the entire area "inside being all the black colored area has to be removed literally leaves the outer edge a shell . 12.4 inch removes all the black plus some of the gray in order too fit the acrylic slider kit ...
This is just how I did my 10.2" ipad in my s10. I relocated the climate panel up and flush mount behind the tablet and fabbed the Radio below in the factory location for the climate panel.
I'm pretty sure I'm just gonna have to lower mine from the bezel down into my factory console area ...in which I've listed a pic of 99-02 style ... and just cut out the dimensions and recess from behind the OEM climate panel . And then below that cut out spot for my single din cage . I can...
Im performing a bezel mod for 12.4" Galaxy tablet where my radio and hvac is located.
I've done this flawlessly with my s10 already. But I had too recess the climate panel behind the tablet .
I believe I have seen the center console style in the 03-06 Tahoe Silverado swapped into 99-02. Are...
Question Is the 03-06 dash shaped the exact same as 99-02 dash specifically where the console meets the dash? My goal is Too put in a 03-06 console . I am Doing a 12.4" Galaxy tab S7 tablet indash with a custom made acrylic kit radio and climate control must be moved out of the bezel . This...
It wasn't any issue at all come too find . I had too actually get into second gear for the locks too switch and show the change as apose to just shifting into Drive from a standstill. It didn't state that in the procedure or the one and only YouTube vid that shows this process.
All good.
Anyone know how I can diagnose or what part of 01 Tahoe audio setup powers the factory sub ? Does this truck have a factory amplified setup
The doors all work great 4 channels running off a jvc single din . The previous owner stated he got the truck with a 8" Sony replacement in the rear but...
I already had a link too the door lock sequence programing. I tried that too put the locks back too stock or to be locked while in drive and in park. And the sequencing steps work the locks actuate on off when I release the turn signal lever ... but the final programming seems to do nothing...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.