Search results

  1. ItsAdam1

    Pics of front shocks placement on 4WD Bagged Tahoe/Yukon/Escalade

    those are custom mounts....
  2. ItsAdam1

    Rear air bag brackets (need pics)

    Nope not true... these bags have different spring rates at different pressures. If you want to ride it low in the back then u will have only about 20-30 psi which isn't enough to support our heavy SUV's thus equaling more side to side swaying at low pressures. If you add more pressure (higher...
  3. ItsAdam1

    ok the panhard is going bye bye!!!

    Problem isn't the pan hard. With bags the problem is there isn't enough air (when you ride it low) to stop the swaying of these top heavy SUV's. I have no idea as to why it happening with coil springs. my only guess is you need some good drop shocks
  4. ItsAdam1

    Any good suspension shops in NYC area

    send it to me...
  5. ItsAdam1

    Pics of front shocks placement on 4WD Bagged Tahoe/Yukon/Escalade

  6. ItsAdam1

    Rear air bag brackets (need pics)

    Here is my experience, If you want to ride it low then you will get alot of sway. B/c the 7" bags wont have enough air pressure in them to get them at a nice stiffness for a good ride. So if u install 6" bags they are much shorter and will take more pressure to get to ride height which will...
  7. ItsAdam1

    what airbag sizes and weight to use on 2000 tahoe 4WD

    The front was torsion bar brackets welded to the frame and DJM lower arms... My DJM lower arms are for sale... I am actually working on a bolt on rear kit with a adjustable pan hard bar...
  8. ItsAdam1

    Rear air bag brackets (need pics)

    those are RE7's but if I had to do it again I would go RE6
  9. ItsAdam1

    what airbag sizes and weight to use on 2000 tahoe 4WD

    I dunno it all depends and what you plan on doing... If ur just looking to replace the springs with bags I would do with 2500 bags or the 6" bags
  10. ItsAdam1

    front airride brackets...

    The torsion bar brackets... I sell them to $30.00 gets the triangle braces and the torsion top plate... oh and its plus shipping...
  11. ItsAdam1

    front airride brackets...

    you can do the second picture...
  12. ItsAdam1

    panhard bar?

    I had been planing for months make one for the GM SUV. fully adjustable... I guess I need to get to work...
  13. ItsAdam1

    Is there such a thing of a BOLT ON BAG KIT

    NO!! not for GM suv's..... actually I take that back ART shockwaves are bolt on up front....
  14. ItsAdam1

    Bagging an 03 Hoe.....(56k Killer)

    I just ground the lip down and flush with the frame and plated it in the added my upper mounts from there...
  15. ItsAdam1

    Bagging an 03 Hoe.....(56k Killer)

    those are some tall brackets I would cut them down. I think when I measured I had about 5" when the axle was fully compress. So the compressed slam bag is 3" to that left about 2" for the cups.. But I went with weld on axle brackets and very short upper cups.
  16. ItsAdam1

    Bags on Lower Control Arms

    I just drilled a hole for my lower bag mount using those DJM LCA's
  17. ItsAdam1

    my truck (56k no no)

    is that fuel cell going where the spare use to be?/?
  18. ItsAdam1

    Rear air bag brackets (need pics)

    here are my rear cups I made, the last pic shows how low it got me
  19. ItsAdam1

    my truck (56k no no)

    I get rid of the neg camber, new control arms or flip the upper arms and raid the mounts like 1.25"-1.50" Hey did they have to pull your dash and everything behind it to tub your firewall?? I am thinking I might need to do the same thing but I am hoping I can get away with out pulling the dash
  20. ItsAdam1

    need help on rear air bagged

    Yo cuz-22 where you from?
  21. ItsAdam1

    Houston truck meet - everyone invited!!!

    kool thats very close
  22. ItsAdam1

    Houston truck meet - everyone invited!!!

    Damn the house idea is badass. but I live in houston so I am out... But I will be there for the meet..
  23. ItsAdam1

    Front Air Ride Kit. Anyone using this????/ Reviews???

    Hey no problem I just want you to be informed about them. I never heard of any thing good about them.... FYI: I do carry mostly everything for air ride.......... I need to sign up as a vender over here i have some Viair compressors on sale too...
  24. ItsAdam1

    Really leaning towards Bagging the Nali

    ya I wouldn't do a reverse triangulated rear, these trucks are way to heavy to do it this way. Reverse four links belong on a POS mini truck...... Your best bet on a budget is a 2 link and a track bar or a pan hard bar. But even those have there disadvantages... But I am running one to save...
  25. ItsAdam1

    Front Air Ride Kit. Anyone using this????/ Reviews???

    FYI stay away from chassis tec or shAIM.. basically they are the dollar store for air ride parts...http://www.fullsizechevy.com/forums/general-discussion/street/137429-chassis-tech-aim-products.html And btw that kit is nothing new. bags over the upper control arms has been done may times to...

Forum statistics

Threads
134,884
Posts
1,910,219
Members
100,227
Latest member
PrinceTut

Latest posts

Top