Search results

  1. Blackie

    Crank but no start-please help

    I didn't get to see the old one as they kept it for the core and I didn't think to look at it before I took it to the dealer for repairs.
  2. Blackie

    Crank but no start-please help

    So I finally got the truck back today. According to the dealer, it turned out the Passlock and the PCM modules failed and had to be replaced. So, $2,191.15 later my truck is running like a champ again! Thanks to everyone who posted in efforts to help out.
  3. Blackie

    Crank but no start-please help

    Thanks for the input lyncht1967. The truck is currently over at my local Chevrolet dealer. I talked to the service advisor yesterday. He said the truck is in the repair bay and the tech working on it is on vacation all next week! Luckily there's no rush on my end for me to get the truck back. He...
  4. Blackie

    Crank but no start-please help

    I did take off the grounds (except the one that's wedged between the engine and the firewall) as you suggested previously and cleaned the contact points good before reconnecting them and no luck. I believe it is a bad ground or wire that came loose but could not for the life of me find one!
  5. Blackie

    Crank but no start-please help

    Not yet. I ran the fuel pressure test and it was on the low side at 46psi. I took it to a small repair shop and they got 49psi on their pressure test. They said that is within range to start the truck so they don't think it's a fuel issue. They found that their was no spark at the coils. I...
  6. Blackie

    Crank but no start-please help

    Thanks for the reply @OR VietVet I replaced the spark plugs and wires about 3 months ago so unless I got some bad ones they should be good. I'll have to get the fuel pressure gauge Fless mentioned to test that. The cranking rhythm sounds like it always has in the past, it just won't fire up. My...
  7. Blackie

    Crank but no start-please help

    Thanks for the reply @Fless. I just removed those 2 wires and cleaned them real good as well as the frame they were mounted to with no luck. Something I forgot to mention in my first post is that 2 weeks before my problem, my gauges in my cluster intermittently did not work. The truck would...
  8. Blackie

    Crank but no start-please help

    My 2004 Yukon with the 5.3L with 210K on the odometer died on me 2 weeks ago when I had the A/C full blast on a hot day. It started idling rough at the stop light so I pulled over and it died. It started up after an hour of multiple start attempts and seemed to drive home fine. Two days later I...
  9. Blackie

    Sloppy steering after steering gear rebuild

    I was able to get under the truck yesterday and found that the centerlink was on correctly. I did the preload adjustment and it drives great again. Thank you to everyone who provided input.
  10. Blackie

    Sloppy steering after steering gear rebuild

    Thank you all for the input. I'll hopefully have time to get under the truck tomorrow and get it fixed.
  11. Blackie

    Sloppy steering after steering gear rebuild

    A couple months ago I rebuilt my power steering gear on my 2004 Yukon because it was leaking PS fluid. Since I was there I replaced the pitman arm, idler arm, tie rods, and sway bar end links. It turned out to be the C clip was broken in the PS gear. I drove the truck for roughly 250 miles...
  12. Blackie

    Push to start button install

    I will answer in order with the number on your picture. If you plan on placing the push to start button in the key position and remove the key cylinder completely (like I did), there will be no need to cut the key as this bypasses the steering wheel lock. 6. Starter Wire-Correct 3. Ignition...
  13. Blackie

    Help with virgin install 2003 Tahoe.

    I use one of these to watch videos from my phone on my Pioneer screen in my truck. https://www.ebay.com/itm/For-Car-WiFi-Router-With-Screen-Device-Mirroring-Support-iOS-Andriod-System/132674816985?hash=item1ee4090bd9:g:FtsAAOSw2tRZdwE8
  14. Blackie

    Passenger Rear Window Issues

    Update: I just saw your other thread where you found the problem. Do you have a voltmeter? I would test to make sure you have voltage at the drivers door switch while trying to roll the window up. If you don't, you might have a break in the wire from the drivers switch to the rear passenger door.
  15. Blackie

    Push to start button install

    Do you know what brand the remote start is? You would want to find out if it can integrate with an aftermarket alarm system so you don't have to have multiple remotes for the remote start and alarm system.
  16. Blackie

    Push to start button install

    Shreksbrothers kit is if you don't already have an alarm system. It is an alarm, remote start, push button start system. My install was because I already had an alarm/remote start on my truck. My setup does exactly what you said you want (alarm, remote start, push button start, passive key) and...
  17. Blackie

    Push to start button install

    https://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F192448664610
  18. Blackie

    Push to start button install

    Does your alarm only have 1 Accessory output? What alarm are you using?
  19. Blackie

    Fog lights auto on with headlights?

    This one? http://www.tahoeyukonforum.com/threads/how-to-do-the-4-or-6-high-mod-on-an-03-06-full-size-truck-for-3-00.571/
  20. Blackie

    What did you do to your NBS GMT800 Tahoe/Yukon Today?

    I wash, clay bar, compound pad with Meguires Ultra-Cut M105, polishing pad with Meguires M205 Ultra Finishing Polish, finishing pad with Meguires High-Tech Yellow Wax, then apply the ceramic coat. I use the Harbor Freight 6" DA polisher for application and their microfiber spa polishing cloths...
  21. Blackie

    What did you do to your NBS GMT800 Tahoe/Yukon Today?

    Did a full paint correction detail with a ceramic coating on top. Two days worth of work and I am beat! PaintCorrection by Blackie posted May 29, 2018 at 1:39 AM PaintCorrection2 by Blackie posted May 29, 2018 at 1:39 AM PaintCorrection3 by Blackie posted May 29, 2018 at 1:39 AM
  22. Blackie

    Avital vs Viper?

    Both can be found on Ebay. The Viper version is $115 and the Avital version is $99.
  23. Blackie

    Avital vs Viper?

    They are the same alarm so it really comes down to which remote you like better. I have the Viper version and it is a great alarm. Remote range is very good. Both Viper and Avital are owned by the same parent company, DEI.
  24. Blackie

    8 Ohm-4 Ohm Speakers

    Most (if not all) aftermarket car audio products are 4 ohms or lower. Home audio products use 8 ohms by default. Toilet reading: Ohms Law
  25. Blackie

    Anyone running 20x8.5 +15mm wheels?

    I am looking at getting some 20's to replace my 24's and found a good deal on the size in the title. Anyone running that exact size and offset and have any side shots so i can see how flush they are with the fenders? TIA

Forum statistics

Threads
129,265
Posts
1,813,029
Members
92,368
Latest member
agmanw8n

Latest posts

Top