Search results

  1. D

    Drivetrain Bearing Noise - Where to Look Next?

    Thanks everyone for the input. I do have PA state inspection coming up shortly so when I schedule my appointment I will see if the shop will charge a diagnostic fee or similar to investigate this while they have it up on the lift. Agreed on the rear axle bearings. Unfortunately that passenger...
  2. D

    Drivetrain Bearing Noise - Where to Look Next?

    Good Morning TahoeYukon Folks, I am in the process of plotting my next move to track down some drivetrain noise on my 2009 1500 XL 5.3. Just rolled over 99,000 Miles. I was hearing some excess road noise and correctly assumed that my front hubs/bearings were toast, so I replaced those, and my...
  3. D

    Front CV-Axle Replacement Question

    Seems like both questions on this thread are resolved but I just did this job last week so I'll chime in -- Just take out the strut and you can get the CV in and out without much of a fuss. It looked to me like you could do the job by removing the sway bar endlinks as well but the strut gives...
  4. D

    XL / Suburban Rear Quarter Panel Rust

    Thanks for all the input so far. @intheburbs I would love to have a garage to park this truck in as I suspect that's where it lived before I got it, but unfortunately for now that's not in the cards. Sounds like proper body work is the only way to go. Will have to get a quote.
  5. D

    XL / Suburban Rear Quarter Panel Rust

    Greetings Tahoe Yukon folks, I have an 09 XL with 88,000 miles on it, and I have the dreaded rear wheel well rust starting on it. I have some bubbling in front of my rear tire on both sides, and a spec or two on the arches. I pulled the wheel well liner today to see if I could see what's...
  6. D

    Best Factory Compatible Headlamp Bulb (Low Beams)

    Greetings All, I have a 2009 XL and I am looking to improve my headlight bulb performance, preferably without a new housing. I had a 2009 Sierra previously that I ran a Morimoto 35W H11 HID kit on when I got tired of replacing Sylvania Silverstar Ultras. I have not needed to replace the bulbs...
  7. D

    Tired front struts, already replaced the rear with Bilsteins (not available for the front)

    If I remember correctly the "hat" / plate component of the assembly was thoroughly rusted to the top of the shock where that large bolt goes on. This was 6 years ago now so I'm a little fuzzy on what exactly was wrong. I remember looking for a replacement piece sold separately but couldn't find one.
  8. D

    Tired front struts, already replaced the rear with Bilsteins (not available for the front)

    Wanted to chime in here because I'm interested in doing similar in my 2009 XL SLT, and had a bad experience with this in the past with my old 2009 Sierra SLT. I installed 4600s in the rear of my sierra myself, and bought the 4600s for the front and asked my local shop to disassemble and...
  9. D

    Factory Look Aftermarket Head Unit/ Reciever

    I would not be opposed to a BT module if there are some good options. I'll have to take a look at the harness to see if I have the inputs. I know it has L/R inputs for XM but I'm not sure how that will work with the software of the receiver, or if it has an aux input channel.
  10. D

    Factory Look Aftermarket Head Unit/ Reciever

    Good Evening TahoeYukon Folks, I am reaching out for a recommendation on a head unit that looks as close to factory as possible that has Bluetooth audio streaming capability compatible with new android devices, and retains all factory functions including steering wheel controls, door chimes...
  11. D

    2012 better years?

    Most of my experience on this comes from the pickup trucks but I'll chime in. If I remember correctly they had an updated valve cover gasket and an oil deflector added to the pan on the newer 5.3 engines in order to keep the oil from bypassing the rings during V4 mode activation. You'll still be...
  12. D

    Fishing rod storage

    Interesting as I just tackled a similar situation and am currently running the $15 strap style rod rack across my ceiling, but would prefer it to be much higher up. I was contemplating designing a fitting to replace the rear coat hanger hook that would do something similar to the modtrak system...
  13. D

    Calling All AirAid MIT owners 2007-2014

    It's possible but according to him it was on a 2012 Tahoe. Any idea what that passage is supposed to look like?
  14. D

    Calling All AirAid MIT owners 2007-2014

    These two holes : are they supposed to be this small?
  15. D

    Calling All AirAid MIT owners 2007-2014

    I think I can get this squared away from a sealing perspective but I'm concerned that the two holes that go through the plastic to allow the air through may be hosed up in some way. Is anyone able to confirm that there are supposed to be 2 small holes connecting the breather side to the intake side?
  16. D

    Calling All AirAid MIT owners 2007-2014

    Photos attached. Removing the threaded fittings shows damaged threads and 2 small holes in the bore that go through to the main airflow path.
  17. D

    Calling All AirAid MIT owners 2007-2014

    Good Afternoon Folks, I just purchased a used Airaid MIT tube model 200-996 for my 2009 Yukon XL 5.3L. Can anyone tell me what the orifice for the breather tube looks like when it interfaces with the main AirAid tube? The previous owner of this tube seems to have somehow damaged the female...
  18. D

    Advent OGM-1 upgrade

    So I spoke to Walt at ADC Mobile, who was super helpful, and he was able to confirm that the Advent module will indeed plug and play with my factory harness. He also suggested a backup camera as good or better than the factory units https://www.adcmobile.com/product/zna-2406/. I received my...
  19. D

    Airaid 200-996 Modular Intake Tube ?

    If you don't like it I'll take it off your hands! I had one on my Sierra but sadly left it on there when I sold it. I have an 09 Yukon XL and I'm looking for another one, just don't want to spend the $185 full price. It is one of the few intake products for these engines that show dyno-proven...
  20. D

    Advent OGM-1 upgrade

    Good Evening TYF folks, I am new here, and am looking to ugrade my factory Bose head unit (non-nav) to a factory nav or factory-looking nav unit, as well as add a backup camera. I had a gmt900 Sierra for over 10 years and back then the bees' knees head unit was the Advent OGM-1. I never did...
  21. D

    New Guy

    Will try to add a few pics as I have some time. In the meantime, I plan to keep this rig mostly stock, but I would like to do a few upgrades. So far the plan is to add an AirAid MIT tube, tune with my diablosport tuner to get rid of AFM and adjust the TCM, and swap the head unit (non nav) for a...
  22. D

    New Guy

    Good Morning TahoeYukon Community, Reaching out from Pennsylvania -- I just bought a low mile 2009 Yukon XL SLT. I am sort of new to the Tahoe Yukon world but I have had a GMT900 truck for 10+ years. Looking forward to getting the most out of this vehicle and learning more with this forum. I...

Forum statistics

Threads
138,039
Posts
1,997,650
Members
102,975
Latest member
jkhuntzinger

Latest posts

Back
Top