Search results

  1. E

    Alternator

    Rebuild the one you have got. You can not purchase one of the same quality has the one that came originally with your truck new. Not even from gm. Just copies.
  2. E

    Exhaust manifold clamps

    You can buy the clamps cheaper on ebay. I have used them in the back corners. They work but stink putting them in.
  3. E

    Chasing Vacum Leakes!

    So I wanted to for sure know that I had no vacum leakes or any other kinda leakes in the newly repaired Tahoe. So I put together a smoke machine in about fifteen minutes. Used it on my tahoe, didnt find much. But , I have been chasing a intake leak on my lifted honda ridgeline for a few months...
  4. E

    2005 Tahoe Fuel System Upgrade

    made a phone call for ya 70 mm turbo 60 lb injectors!Up to 650 hp
  5. E

    2005 Tahoe Fuel System Upgrade

    80 pounders?
  6. E

    Reduced Engine Power - on startup only

    check the battery voltage in the morining before start up.
  7. E

    Head gasket question/advice (05 Tahoe 4.8)

    To low of miles. Pull the heads takem in and pressure check them clean it all up put back together , run it until 500 thousand!
  8. E

    Broken Connecting Rod! Yikes

    Okay guys, got her all butoned up today, hit the key smooth has silk. I went ahead and pulled the other head. Valves were in bad, bad shape. Did a valve job in my garage, new seals new head gaskets. Double checked all the injectors hit the key pure sweetness. Finally. Thanks for putting up with...
  9. E

    Harmonic Balancer install?

    Well guys, when I took off the harmonic balancer I noticed there was no key. I failed to mark how it came off. I asked a couple techs over here and they told me just to put it on. I dont buy that. So now what do I do? I read somewhere here put it at top dead center and align a pointer of the...
  10. E

    Need a little help with compression test diagnosis

    your problem is worn out rings not valves. Take the heads in have them checked surfaced valve job put it together and run it. Thats low compression for that many miles. Change your air filter more often.
  11. E

    2002 Yukon/Another knock sensor thread

    relocate them from under the intake to the heads.
  12. E

    Trouble filling up the gas tank

    I was having knock sensor problems like we all have. I took them out of under the intake and relocated outside. One on left front head and one one drivers died head on the side. New wires, no more problems.
  13. E

    Trouble filling up the gas tank

    evap electronic vent valve is dead.
  14. E

    Here is pics of the broken parts!

    Ill do a write up when I am finished!
  15. E

    Here is pics of the broken parts!

    Im sorry guys, a bit computer illeterate.
  16. E

    Need your Help Please!

    Anyhow got it running, 150 lbs in all cyclinders exept two there at 120 got a few small things to take care of. Idles good so far hasnt pulled any low power stuff.
  17. E

    Need your Help Please!

    boy you sound like someone I know me. You didnt put oil in the cyclinders then do another compression test?
  18. E

    Here is pics of the broken parts!

  19. E

    No oil pressure at start up, 2001 Tahoe

    Wow that is awesome!
  20. E

    Broken Connecting Rod! Yikes

    Well I did compression test followed by leakdown test all my problems on the drivers side. Pulled the head off, number five had zero compression. So I wigled on top of the piston and it pushed freely all the way down. So I have a broken connecting rod. Hopefull not a chewed up crank. Ill...
  21. E

    Need your Help Please!

    See how awesome you guys are. But unfortunatellyh, I we , have bigger problems, did a compression test last night nuber one 90.00, 2 150 3 90 4 70 5 0 6 120. Did a partial percentage test horrible. So i pulled pistons up no holes. I am praying all burnt vavles. Not ready to do a motor...
  22. E

    Need your Help Please!

    Hi everyone, I am in dire need of a wiring schematic for the 2005 tahoe on the injector system. Basically, I need to know what wire color goes to the injectors for each cylnder. 1 2 3 4 5 6 7 8 . I made a mistake or a few when I installed the new pigtails for all eight injectors. I feel...
  23. E

    Reduced Engine power, Service Stability System

    WEll everyone that part of it is fixed. Had to be a combination of the .6 volts at the fuse box, and the connector on the tac, felt really loose on the pins when you push it in and out. But, the injectors two of them are bad. It just never ends. Thanx !
  24. E

    Reduced Engine power, Service Stability System

    when you get a chance check the three power wires going into the fuse box. Especially the one in the middle, its red bolted down see if you have 12 volts?
  25. E

    Reduced Engine Power write-up

    I did the testing on the pedal sensor, and it failed the first test. Also tonight I found not one set but two sets of connectors on the wiring for the throttle body. I cut all that out and soldered it up with heat shrink tubing. I was lining it out for the custom harness. I think it would be...

Forum statistics

Threads
138,038
Posts
1,997,634
Members
102,975
Latest member
jkhuntzinger

Latest posts

Back
Top