Search results

  1. M1Gunner

    TailLight Problem :(

    Well here’s the thing. The stop tail and license plate lamps all share a common ground, therefor you can go ahead and cross the ground off bc it’s good. The right plate lamp and running light run on the same power supply BUT the left running lamp is on a seperate circuit. Have you...
  2. M1Gunner

    Power seat trouble

    If the heated seat AND pedals don’t work... it may be due to the switches in the door. They’re both in the same housing and it may have given up the ghost. Of course check the plug and harness to it too. They’re both on seperate circuits but that’s the one thing they both have in common. Just...
  3. M1Gunner

    Brakes are farting

    Sounds about right. Parking lot coasting... Hope so brother, keep us posted!
  4. M1Gunner

    My former 2006 stolen Yukon XL recovered

    You know what’s fun... having your hoe stolen. Having to replace the ignition lock cylinder and then losing the key to the door just before your battery decides to shit out on you rendering your fob useless. That was a fun day... learned myself how to re-key the door lock real quick after that...
  5. M1Gunner

    Brakes are farting

    One thing to look at, not saying this will solve your issue, but get a scan tool and check your wheel speed data. If there’s one that’s cutting out at low speed, which gm wheel speed sensors are known to do, you’ll get an unwanted abs activation resulting in the symptoms you are having. Again...
  6. M1Gunner

    Brakes are farting

    Skip to 29 sec... that’s exactly it! lmao
  7. M1Gunner

    4l60E RPM Question

    My rpms sit around that and I’m on 37’s rollin 5.13 gears. Well, when I’m runnin 75 on the highway I’m right dead nuts at 2k.
  8. M1Gunner

    Torque specks for break bracket to knuckle?

    The caliper bracket bolts are not torque to yield bolts so the torques spec does not change. Always, new or used, torque these bolts to spec and yes he is correct in regards to applying thread lock to the caliper bracket mounting bolts.
  9. M1Gunner

    Cause of transmission front pump to fail?

    I will say this though, recently a friend of a friend dropped his Dodge Ram off to me and said it was shifting extremely harsh and at times not wanting to properly downshift. He took it to Tires plus and was quoted a new transmission. After talking to our mutual friend he dropped it off to me...
  10. M1Gunner

    Cluster Not Working

    Ha! IT’S ALIIIIVE!!!! That’s awesome, hopefully it stays all good brother!
  11. M1Gunner

    Torque specks for break bracket to knuckle?

    129Ft.lbs is correct for 1500 and 221Ft.lbs for 2500
  12. M1Gunner

    Cluster Not Working

    ^^^lmao
  13. M1Gunner

    Cause of transmission front pump to fail?

    The tps sensor will NOT cause the pump to fail. The pump works off directly off engine rpm and it’s the electronic pressure control solenoid that regulates the transmission line pressure. Will the PCM work with TCM and use the tps sensor to help designate shift points, absolutely. But the tps...
  14. M1Gunner

    Cluster Not Working

    No those aren’t fuse numbers. Those are the cluster harness connector terminal designations.
  15. M1Gunner

    Front wiper and fluid switch broken?

    The switch is in fact your issue. The fact that it only works in HI mode is the dead give away. Check out this schematic and notice that every speed beside high has a resistor to vary its speed. High is the only one without a resistor. Therefor you have a resistor within the switch that has gave...
  16. M1Gunner

    Cluster Not Working

    As far as the cluster and vanity light being tie together, in my opinion, it’s highly unlikely that would be the case and nothing else was effected. Solely on the fact that there’s other lights and such on that circuit that would also be giving you issues. The switch in the sunvisor for your...
  17. M1Gunner

    Cluster Not Working

    The cluster illumination runs on it own seperate power and ground. So yes they can stay on if the rest of the cluster loses power. That way the brightness of the lights can be adjusted via the dimmer. A11 & A12 are the power and ground for the illumination. The IPC fuse is in the Underwood...
  18. M1Gunner

    Cluster Not Working

    Being able to test with a known good cluster is nice. Once you pull the dash bezel and the 4 cluster screws, turn the ignition on and see if you can get the cluster to come to life by wiggling it and playing with the harness/connector. The terminals in the harness side are pretty good at...
  19. M1Gunner

    Broken outer door handle?

    Just to verify though, it is JUST the handle that has play and not the whole assembly correct?
  20. M1Gunner

    Broken outer door handle?

    More than likely replacement, unfortunately, is gonna be your fix. It’s usually one of two thing. Either the plastic clip that’s attached to the handle by a spring has slipped on the latch rod OR what probably happened, is the plastic end of the handle that you can’t see, that’s hooked to the...
  21. M1Gunner

    Front wiper and fluid switch broken?

    You said you checked one but there are two fuses and how about the relay? There’s a relay under the hood that will disable both the fluid pump and wipers if it goes out. One fuse is left side of dash. The other along with the relay are under the hood. Double check all three and report back...
  22. M1Gunner

    04 Tahoe gauges and dic not working

    Sometimes pushing/tapping the center of the top of the cluster will give it a quick breath. Pull the cluster, verify each terminal in the cluster's harness connector is properly secured. Spread some die electric grease in the terminals and resecure. Make sure the cluster stays powered before...
  23. M1Gunner

    P0300 at 75mph 03 yukon xl denali 6.0 4l65e

    300 is random misfire. If a single cylinder was at fault then it would set 301, 302, 303... etc. The fact that it is random means that the cause is something that would effect all cylinders I.e. Lean condition, rich condition, unwanted spark advance or retard etc. Also, if it was a faulty crank...
  24. M1Gunner

    Engine sounds like it will explode on startup after sitting

    Live data snap shots would be your/our best friend right in this scenario. Any recent work done too.
  25. M1Gunner

    5.3L ADJUSTABLE FUEL PRESSURE REGULATOR?

    are you just having problems idling?

Forum statistics

Threads
137,852
Posts
1,993,661
Members
102,821
Latest member
Andres Padilla

Latest posts

Back
Top