Knocking sound from rear!

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

hertahoe

Member
Joined
Jan 18, 2012
Posts
90
Reaction score
84
Location
Washington
Whenever I back out/drive into my driveway or going around a corner at low speed. Curb is a rolled curb, I get a knock sound and can't find where it's coming from. I have the 2/3 drop with JM sway bar links, belltech shocks, free travel mod and other suspension is stock. I have gone under and pulled on things but can't produce sound. Checked shocks, sway bars bolts, spare tire is secured, but nothing. Much appreciate the feedback!

2005 Tahoe LT, 4wd, 20" wheels.
 

OR VietVet

Multnomah Falls
Supporting Member
Military
Joined
Oct 8, 2014
Posts
19,257
Reaction score
31,731
Location
Willamette Valley
Check all u-joints. Track bar. Wheel center caps. The other thing that a lot of people forget about is the axle shaft play side to side where it slips in and is held at the carrier by the c-clip. Check axle bearings as well. If has a locker, RPO code G80, may need fluid changed in the differential.
 
OP
OP
hertahoe

hertahoe

Member
Joined
Jan 18, 2012
Posts
90
Reaction score
84
Location
Washington
Exhaust is solid, no play and don't see where is would be rubbing.
Check all u-joints. Track bar. Wheel center caps. The other thing that a lot of people forget about is the axle shaft play side to side where it slips in and is held at the carrier by the c-clip. Check axle bearings as well. If has a locker, RPO code G80, may need fluid changed in the differential.
I haven't checked track bar and wanted to replace it when I do control arms. Why would low fluid case a knock sound? Again, another item on the to do list. I did see that the sway bar bushing is under some stress since moving it for the 2/3 drop. The bolts seem to be pointed inwards. Center caps snug.
 

Rocket Man

Mark
Supporting Member
Joined
Dec 25, 2014
Posts
25,966
Reaction score
50,662
Location
Oregon
I had that problem and it was a broken weld on one of my DJM end links in the rear. I know you said you have JM but did you mean DJM?
 

Forum statistics

Threads
129,233
Posts
1,812,504
Members
92,332
Latest member
jmart157
Top