Recent content by xjayx

  1. X

    Tubular trailing arms!!

    The arms I bought were on ebay and they were Control Arms Lower LCA 64-72 GM A Body Chevelle Cutlass GS 442. There the exact same length as the yukon arms just slightly more narrow.
  2. X

    Tubular trailing arms!!

    Hey everyone, its been a while and a few cars since ive posted on here. But ive got two suvs and I just did some trailing arms on both of them. I had sphon arms on my escalade and they were good but I was looking for other options. I bought some GM A body control arms and they are a damn perfect...
  3. X

    awd 6" drop, now I got a vibration outback

    There KMC factions 26x9.5 wheels. I got the new arms just haven't had time to put them in yet. Jay
  4. X

    4-6 drop on 26s

    Yup its Tonys 4-6 kit, had his same kit on my 2010 Yukon and loved it so I had to get it again for my 2014 escalade. My tires are 295 30 26 Pirelli scorpions. The wheels are KMC's 26x9.5 with a +38 offset. they tuck nicely into the fenders. I just trimmed some of the plastic splash guards front...
  5. X

    4-6 drop on 26s

    Yes I said 26s. I have the drop kit from Tony, love the look of the truck. My new wheels just got here 26" KMC wheels in pirelli tires. They fit perfect and look awesome. Jay
  6. X

    awd 6" drop, now I got a vibration outback

    Got the adjustable coming in, hope that does the trick. Got my new wheels on it for now it looks killer now. Jay
  7. X

    awd 6" drop, now I got a vibration outback

    I set the pinion angle to the same angle as the transfer case and the vibrations almost completely gone. Since I can't use adjustable upper arms because of the auto ride I'm going to relocate the mounting holes on the rear end for the upper arm so I can extend my lower bars more to center the...
  8. X

    awd 6" drop, now I got a vibration outback

    So I got Tonys 6" springs the DJM relocation kit and now I have some vibrations. I got some adjustable lower trailing arms to play with the rear end angles. I shimmed the trans up about 3/4" and that seemed to help the most. No matter how I setup the rear end I seem to always have at least a...
  9. X

    Black 24's installed today

    I dont recall the offset but I believe its a +30 on a 9.5" rim. there 295-35 tires on there. I originally wanted a set of 26's but was having a hard time finding a set that would work that I liked. Lexani makes a 26x9.5 that fits might be looking into that when its time for new tires. Jay
  10. X

    NEED 07 UP Tester for 6 inch drop springs

    Send them over to me and ill gladly try them out for you.
  11. X

    Anyone running a spohn adjustable panhard?

    Would this panhard bar work on the 07-up suv's?? If it does im ordering one right now. Jay
  12. X

    3/5" drop on an LTZ?

    3-5 is definitely doable, clearance issues depend on tire size and wheel offset. I have 24's on 295-35-24 tires and the only rubbing I get is at full turn on the fender liner. I have a 3.5-5.5 drop using the belltech trailblazer rear springs and spindles and a coil re locater up front. I also...
  13. X

    Sway bars and autoride

    Picked up my eibach bars today, I already have shorter links in the rear with the axle re locater bought some new poly links for the front. Hope to get these bars in early next week to see how it changes the handling. Jay
  14. X

    Sway bars and autoride

    I was looking into buying a set of eibach sway bars. I have a 2010 Yukon with autoride and a 4-5 drop on it. Theres no application for a autoride truck, are the bars the same for a normal yukon to a autoride yukon?? Thanks. Jay
  15. X

    Power folding running boards

    Does anyone know of anyone adding power folding running boards to there tahoe or yukon? I want to add power running boards but im looking for some info on getting them wired up and working properly. Jay
See more

Forum statistics

Threads
129,235
Posts
1,812,608
Members
92,334
Latest member
BWASTEEZE

Latest posts

Top