-
-
redwing4900 replied to the thread Ignition problem 98 Yukon SOLVED!.Today I was finally able to put this problem to bed. Using the scan tool I set cam retard to 0 it was at +10 when the distributor cap... -
redwing4900 replied to the thread Ignition problem 98 Yukon SOLVED!.I have a zr 11 scanner from harbor freight. I did some digging within the live data menu and the cam retard info is not there. I could...
-
redwing4900 replied to the thread Ignition problem 98 Yukon SOLVED!.Neighbor is out of town so I had a question about spark advance, and possibly doing it myself with what’s available. This is what my...
-
redwing4900 replied to the thread Ignition problem 98 Yukon SOLVED!.I will double check the cmp retard with my neighbor’s scanner. It sounds much better but there is a little hitch when it transitions to...
-
redwing4900 replied to the thread Ignition problem 98 Yukon SOLVED!.Problem solved? Cleaned up some chassis grounds that were quite rusty also did one more adjustment to the distributor: it worked the cam...
-
redwing4900 replied to the thread Ignition problem 98 Yukon SOLVED!.By the way this was not an ac delco part the middle fried off and was laying in the distributor. Sounds like I’m answering my own...
-
redwing4900 replied to the thread Ignition problem 98 Yukon SOLVED!.That picture is exactly what I needed to see, thank you. I was working on the Yukon today moved the distributor back to it’s original...
-
-
redwing4900 replied to the thread Ignition problem 98 Yukon SOLVED!.Yes I was thinking that it was a tooth off because it ran so rough after I did the re stab. I’ll retime it tomorrow I hope it works. So...
-
redwing4900 replied to the thread Ignition problem 98 Yukon SOLVED!.I shot the connections on the coil and ended up getting a new one, tests were in my Chilton manual. After I replaced the coil, a small...
-
redwing4900 replied to the thread Ignition problem 98 Yukon SOLVED!.Also I just remembered that the cps is a master pro. Woops
-
redwing4900 replied to the thread Ignition problem 98 Yukon SOLVED!.Thank you for the response. I had an off brand cap before but this time it’s a Delco. It’s not running yet. Still working it out
-
redwing4900 replied to the thread Ignition problem 98 Yukon SOLVED!.Also no codes are showing up
-
redwing4900 replied to the thread Ignition problem 98 Yukon SOLVED!.I finally had some time today to look things over and found the pictures fuse blown that was in the ENG-I slot 20amp. I checked the...
-
-
redwing4900 replied to the thread Ignition problem 98 Yukon SOLVED!.Great responses which I have come to expect From this forum, Thank you. I did mark distributor position which makes me suspect that may...
-
It looks like there are a few ignition issues popping up around the forum, here is mine. 98 Yukon 5.7L new spider injection, rebuilt...
-
-
Loading…
-
Loading…
