rdezs's latest activity
-
Rrdezs replied to the thread AFM/DoD Delete Advice Needed.Yes. What the LS engine was before GM engineers came up with this AFM garbage. Leaving it "as is" refers to leaving any part of it in...
-
Rrdezs replied to the thread AFM/DoD Delete Advice Needed.Lol ... Following that logic, you should be able to stick your AFM lifters in the non AFM cylinders and crank that engine up.... If your...
-
Rrdezs replied to the thread AFM/DoD Delete Advice Needed.Here's a good article from Speedway motors that addresses the issue. Screenshot below, but here is the link to the whole article...
-
-
Rrdezs replied to the thread AFM/DoD Delete Advice Needed.To further confuse the issue....the cam specs address the normal lobes. The afm lobes are different yet. Different slope angle, etc...
-
Rrdezs replied to the thread AFM/DoD Delete Advice Needed.The cams are different, just measure. (The afm lobes are the main difference, besides the exhaust lift and overall duration.) It will...
-
Rrdezs replied to the thread AFM/DoD Delete Advice Needed.AFM cam has a different profile. (Only on the AFM cylinders) Not suitable to use a standard lifter on the AFM lobes. Here's the basics...
-
Rrdezs replied to the thread AFM/DoD Delete Advice Needed.The "why" behind the AFM delete components: 1. The pre AFM engines were extremely reliable. The AFM components destroyed that. 2. The...
-
Rrdezs replied to the thread AFM/DoD Delete Advice Needed.330,000 plus miles, don't think I'd invest the money in an AFM delete. But that is a bit subjective. Now if the chassis looks...
-
Rrdezs replied to the thread AFM/DoD Delete Advice Needed.Well this issue is well documented regarding AFM deletes.... It seems like every time somebody posts they want to do it, the whole...
-
Rrdezs replied to the thread Oil Pressure - Am I paranoid?.File a claim. We can speculate all day long between the oil pickup tube o-ring, cam bearings, etc ... but if it's under warranty, wash...
-
Rrdezs replied to the thread AFM/DoD Delete Advice Needed.Regarding the cam, you have another choice. An OEM non AFM cam. For example, if you're working on the 6.2, you simply use the camshaft...
-
Rrdezs replied to the thread 2013 Denali with 6.2 prone to burn oil?.A 2013 with 107,000 miles shouldn't be using any oil at all.... Our 2014 at 188,000 miles still doesn't use a drop.
-
Rrdezs replied to the thread Rear Heater Core.Radiator hoses, yes. On fuel hoses, it depends. On a low pressure carbureted system, I have used them. Higher pressure fuel injection...
-
RUpdate to my post. I got the aluminum Dorman part and the Oteiker clamps. I will post pictures tomorrow after the repair. Thanks for all...
-
Rrdezs replied to the thread Repair Shop Costs!.I can't accept the new labor prices. I did my roof 3 years ago spread out over two summers, 31 squares.... All by myself to avoid paying...
