builds4christ's latest activity

  • builds4christ
    builds4christ reacted to mikez71's post in the thread Running lean with Like Like.
    Stock only pulls from one side, and you need to vent from somewhere.. My thoughts regarding two check valves.. what you're considering...
  • builds4christ
    builds4christ replied to the thread EVAP Charcoal Canister Removal Modification.
    I'm kinda thinking of deleting as well. I can tune the purge solenoid out, but where should I disconnect the hoses and let it vent? I'm...
  • builds4christ
    builds4christ replied to the thread Running lean.
    Yeah I agree. I think maybe the pcv system is screwed up man. When it was setup stock, the port on top of the intake was attached to...
  • builds4christ
    builds4christ reacted to mikez71's post in the thread Running lean with Like Like.
    That is odd that it's running so differently from when you got it? I suspect the vacuum is normal, but maybe because you're sucking on...
  • builds4christ
    builds4christ replied to the thread Running lean.
    Alright, got some stuff to report. Drove it today and it ran badly. A couple things to note. There was surging for one and LTFT were...
  • builds4christ
    builds4christ reacted to mikez71's post in the thread Running lean with Like Like.
    And I'm not saying it won't run well. Should run the same under boost as when you re-routed the PCV to blower inlet.. (blowby might...
  • builds4christ
    builds4christ replied to the thread Running lean.
    Hmmmm. Dang it. Well, let's see. The stuff should be coming tomorrow morning. I'll report back.
  • builds4christ
    builds4christ replied to the thread Running lean.
    I think we're on to something. So during the time it was initially screwing up the LTFT, both were PCV's going into the inlet of the...
  • builds4christ
    builds4christ reacted to mikez71's post in the thread Running lean with Like Like.
    Boosted setups have to vent, so what you're doing sounds right. So long as it's not leaking after the MAF, you should be fine. (Your MAF...
  • builds4christ
    builds4christ replied to the thread Running lean.
    Question guys. Any chance where I run the catch can return can affect it? So I have both PCV runs meeting at a tee, then going to the...
  • builds4christ
    builds4christ reacted to West 1's post in the thread Running lean with Like Like.
    If the short term FT is staying close to zero you are running perfectly. The front or close to engine O2 sensor gives your computer...
  • builds4christ
    builds4christ reacted to mikez71's post in the thread Running lean with Like Like.
    Partly maybe because he's supercharged. He's idling around 50kPa, when usually it's around 40kPa (7psi vs 6psi) Also his RPMS are 700 vs...
  • builds4christ
    builds4christ reacted to Fless's post in the thread Running lean with Like Like.
    Yeah, I wasn't taking into account the supercharger.
  • builds4christ
    builds4christ replied to the thread Running lean.
    Thanks for the explanation. Strangely the stft don't look too off. I've seems them go +/- 10% but then settle around 0. Idk. I guess...
  • builds4christ
    builds4christ reacted to Fless's post in the thread Running lean with Like Like.
    LTFTs are based on the history of the STFTs at certain loads. So if you're resetting the LTFTs then they should be affected only by the...
Show older items

Forum statistics

Threads
138,085
Posts
1,998,546
Members
103,009
Latest member
a1parrothead

Latest posts

Back
Top