Recent content by 95TwinTT

  1. 95TwinTT

    Torque converter selection

    It's important to know that the off the shelf TC's almost never run at the advertised stall speed. The reason is simple. A TC must be matched to the power curve of the engine and gear reduction of the driveline. Midwest Converter can build a converter for your exact application. Use this...
  2. 95TwinTT

    STS Rear Mount turbo on 5.7 vortec stock?

    What you are asking is what color lipstick looks best on this PIG? Any kind of boost on a stock engine ends up putting you on a “Merry Go Round” that is hard to get off of. Getting the extra air pumped into the engine is the easy part. Controlling the precise amount of fuel quality and...
  3. 95TwinTT

    Beginner welder recommendations?

    If you are just starting out with welding, a "Flux Core Wire Feed" would be a inexpensive welder to begin with. They are small, do a decent job and you don't have to screw around with the gas. If all goes well and you want to expand, then you can move up to the MIG with the inert gas...
  4. 95TwinTT

    Weird vibration just started a few days ago...

    Got to be drive line issues if the gas pedal can change it. Check U-joints.:party28:
  5. 95TwinTT

    obs 1999 tahoe build

    Haven’t had anything to complain about. Tahoe is running better than ever after a week long “super tune” at TPIS in Chaska. They have a dyno that bolts to the rear axles. Boss man Jim Hall found some more mid range power in the process of working on road worthiness. The low fluid light...
  6. 95TwinTT

    obs 1999 tahoe build

    The big block would be best for low end power for N/A. I would check with some of the engine builders for possible deals on exchanges. Transmission wise, the 4L80e would be trouble free compared to a "built" 4L60 When choosing the axle ratio keep in mind that the gear ratios of the trans...
  7. 95TwinTT

    Super Tuning

    This won’t mean much to most of you. Just a point of interest. Finally found the perfect tuner. Guy by the name of Jim Hall. He has a company known as TPIS in Chaska MN. They have the “Eddy current” dyno that bolts to the rear axles. They can simulate any road condition at any speed...
  8. 95TwinTT

    Nominations for May TOTM is ...Old Body Styles

    Best time on the Camaro so far is 11.03 @ 130 mph. Sixty foot time was just over 2 seconds. It needs a better driver and high 10's are possible. Problem with that is, they would then want a cage instead of just the roll bars. It's a street cruiser, so I will not mess up the car trying to...
  9. 95TwinTT

    Nominations for May TOTM is ...Old Body Styles

    Last time at the strip, I forgot to program the ECM for open loop at WOT. The net result was the fuel injectors were shutting down when the wideband saw the rich mixture from the alcohol injector that comes on at 6 lbs boost. But with that, it did 12.3 @110 mph. I’m sure if I can get past...
  10. 95TwinTT

    Nominations for May TOTM is ...Old Body Styles

    Thanks Adam for the Vote. I’m sorry, but I never did figure out how to move pictures around these Forums, so I did a couple of pages at Car Domain for that purpose. I don’t use it for anything except a place to hold the pictures. The link is at the bottom of the page. This 95 Tahoe is...
  11. 95TwinTT

    do want dooo wannnt :drool:

    I would be worried about how much time this truck spent towing. Those mirrors are for serious towing applications. I would also ask how many clutches and tranny's it has gone through. ;)
  12. 95TwinTT

    Headlight fuse?

    Headlights don't use a fuse. They are on a breaker that automatically resets when it cools off...............
  13. 95TwinTT

    Lets see what kind of help i get here...

    Headers are notorious for not being true (flat across the exhaust ports). If you put a straight edge across the face of the exhaust ports, you would probably see where they are off. It doesn’t take much. I had the same problem. One cylinder on each of the headers kept blowing the exhaust...
  14. 95TwinTT

    Install TURBO CHARGER

    You didn’t mention what kind of money you were willing to spend? It all depends what you choose to make the mod’s. Turbochargers come in many sizes. You would need to find the exact size that would work with your displacement. The OBD-2 is not the best ECM for Forced induction. An...
  15. 95TwinTT

    Gas choice

    It depends on where you live in these here United States. Local laws govern what kind of gasoline is sold in your area. Ethanol is one of the oxygenating components, but there are others. Aside from the problems alcohol can cause, it does by itself have higher octane. It does not have...
See more

Forum statistics

Threads
129,386
Posts
1,815,211
Members
92,573
Latest member
hadi awais

Latest posts

Top