What did you do to your NBS GMT800 Tahoe/Yukon Today?

[Rocket Man]

I tried banging the top of the dash with no luck.

With your head?

 

[Fosscore]

^^

 

[Tonyrodz]

With your head?

With my gun. Accidently went off and put a hole in the windshield.

 

[KReed450]

Went and dropped off the HD hood for paint!!

 

[Tonyrodz]

Went outside this morning to take the cluster out. Checked first before removing it and it works now! As @Galante stated, probably is a bad ground somewhere, but as usuals, I don't have time.
I also added 1 qt of oil because it was low.
HAPPY THANKSGIVING EVERYONE!!

 

[mals]

Went outside this morning to take the cluster out. Checked first before removing it and it works now! As @Galante stated, probably is a bad ground somewhere

It may also be a bad solder joint on one of the surface mount resistors on the main board up and to the right of the speedo stepper motor.

I had to reflow the ones to the left that control the PRND321 lighting, but the video I watched (and linked in the post on my build thread) pointed out the others that control the main power to the console. I reflowed them while I was in there just as preventative maintenance.

 

[Tonyrodz]

It may also be a bad solder joint on one of the surface mount resistors on the main board up and to the right of the speedo stepper motor.

I had to reflow the ones to the left that control the PRND321 lighting, but the video I watched (and linked in the post on my build thread) pointed out the others that control the main power to the console. I reflowed them while I was in there just as preventative maintenance.

Have a link? I actually had this cluster rebuilt. All new steppers and the prndl was reflowed too.

 

[TwiztidPixel]

Finally installed my Powerstop rotors, Wearever Platinum Pro pads (thanks again @corvette744 for the heads up thread on the PS pads). Also replaced my rear shocks as I had a squeaky one driving me nuts.

Very happy with the brakes. The shocks are just some Monroes I got a good deal on, so we'll see.

 

[Tonyrodz]

Finally installed my Powerstop rotors, Wearever Platinum Pro pads (thanks again @corvette744 for the heads up thread on the PS pads). Also replaced my rear shocks as I had a squeaky one driving me nuts.

Very happy with the brakes. The shocks are just some Monroes I got a good deal on, so we'll see.

View attachment 187313 View attachment 187314

I'm needing brakes soon myself. What's 5deal with the platinum pro pads?

 

[05Single]

Went outside this morning to take the cluster out. Checked first before removing it and it works now! As @Galante stated, probably is a bad ground somewhere, but as usuals, I don't have time.
I also added 1 qt of oil because it was low.
HAPPY THANKSGIVING EVERYONE!!

I vote cluster issue too. Take it back, get a refund !