Stabilization and Traction warning 2013 Tahoe 2WD

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

HughW

TYF Newbie
Joined
Jun 4, 2021
Posts
19
Reaction score
9
2013 Tahoe gives Stabilization and Traction warning. I replaced front speed sensors just because it was an easy start. I have a cheap scanner tht says Front Steering Position Circuit C0455-00 (1/3)
Steerin Wheel Angle Signal C0710-00 (2/3)
Steering Wheel Centering C0253-00 (3/3

Is this something that requires a part replacement or is there an adjustment that a shop can make? Thanks for your help
 

Sparksalot

Supporting Member
Joined
Sep 20, 2020
Posts
5,238
Reaction score
14,452
Location
Bastrop County, Texas
The sensor is fairly inexpensive. Getting the steering column out to change it is a booger. I replaced the sensor in thecopcar but left the new one tied to something near the column. That clears the code. after driving a few miles at highway speed, the stabilitrack warning comes up again. It clears after shutdown. The traction control seems to be active though. It hasn’t bothered me enough to do the 2-4 hour change out.
 
OP
OP
H

HughW

TYF Newbie
Joined
Jun 4, 2021
Posts
19
Reaction score
9
Thanks, pulling the steering column is what i wanted to avoid,
 

Forum statistics

Threads
129,359
Posts
1,814,574
Members
92,515
Latest member
GMC GUy
Top