installed ccm 2.5

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

pm80

Member
Joined
Mar 2, 2010
Posts
33
Reaction score
0
07 yukon 305/50/20 terra grapplers and corsa sport
 

Attachments

  • DSC_0364.jpg
    DSC_0364.jpg
    99.2 KB · Views: 136
  • DSC_0365.jpg
    DSC_0365.jpg
    95.2 KB · Views: 92
  • DSC_0363.jpg
    DSC_0363.jpg
    98.3 KB · Views: 88
Joined
Jun 8, 2010
Posts
52
Reaction score
5
Looks awesome! With your experience with your tires...if I go with the Trail Grapplers (295/55/r20) do you think they will be an okay size? I do have a Z71 so the fenders are a little bigger and the tires have more tread on them...just wanted to see what you thought..thanks!
 
OP
OP
P

pm80

Member
Joined
Mar 2, 2010
Posts
33
Reaction score
0
My rims have a +16 offset and barely rub on one side. I don't think they rub at all on the other side. I think with that tire you should be fine. Also it only rubs on the inner plastic and not on the lower valence or the side steps. Your tires would be a tadd narrower and with the stock wheels you would be pushed in a tadd since it has an +35 offset so I couldn't see it being a problem. The roughly 1/2 inch taller tire doesn't seem like it would be an issue at all it is all going to be the width. I also saw were most people on the the chevy forum removed there lower valence anyway.
 

2 E L O

Full Access Member
Joined
Jul 16, 2009
Posts
648
Reaction score
9
Location
Omaha, NE
Looks great! Looks like you installed the rear 1" spacer, as well?

Any other plans for it?
 

emann_01

Full Access Member
Joined
May 2, 2009
Posts
468
Reaction score
6
looks great!!!

what rims are those? do you know if they sell them in black?
 
OP
OP
P

pm80

Member
Joined
Mar 2, 2010
Posts
33
Reaction score
0
The wheels are MB motoring Yuma's. I did install the rear spacers and it was really easy. I put jack on both sides and took one wheel off at a time. It dosen't say to in the instructions, but you have to unbolt the sway bay to get it to drop low enough.
 

Forum statistics

Threads
129,265
Posts
1,813,029
Members
92,368
Latest member
agmanw8n
Top