View attachment 82872 View attachment 82873 Hello TYF, haven't been here in a long while, sold my 05 escalade a couple or three years ago and picked up an 06 EXT as a project truck. Well life got in the way so I'm just now getting back to it. When I first purchased I managed to get some 24's and a drop kit from Tony. Fast forward to a month ago and I started installing my system...2 DDX 15s, two 2kwatt amps, one 1kw amp, one 600 watt amp. 4 infinity kappa 6.5 components, two 6.5 loudspeakers and two 6.5 200 watt subs. Just finished a weeks worth of sound deadening, four 80 mil layers of CLD plus 2lb MLV and CCF just in the doors. I also plan on doing fender wells, the bed, roof and floor but...I'm thinking about switching the rear bench for captains seats out of an ESV, suburban or XL. According to one eBay vendor the bolt pattern is the same on the mounting brackets 20 inch front to back, 17 inch left to right on drivers side and 16 inch passenger side. Can anyone confirm these measurements are correct??? If so does anyone know of a reason this swap won't work?? Not only would the captains look better but I could also build a custom console to hide my spare battery, couple amps and at least one of the 6.5 subs...unfortunately the factory Bose enclosure under the front console won't fit the new ones even tho it's the same size, still unsure what I'll be doing with that space
Sorry for the long post but thanks in advance for any help
Sorry for the long post but thanks in advance for any help