93 yukon doors hard to shut

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Stewy

TYF Newbie
Joined
Jan 24, 2012
Posts
10
Reaction score
0
the drivers door is very hard to shut. almost like it needs re-aligned or something. if its not shut all the way the body lines are off a little. any ideas?
 

992door

Full Access Member
Joined
Apr 30, 2009
Posts
1,590
Reaction score
20
Location
Greenville, NC
Doors pins probably need to be replaced and probably the roller pin also if it is bad
 
Last edited:

bowtiefreak

No Quarter
Supporting Member
Joined
Apr 30, 2009
Posts
5,404
Reaction score
99
Location
Near Philly
Agreed. Rather straight forward job. to check this, open the door and then try lifting it upif it moves they are bad. Watch the hinges when you do this. The door latch may also have the wear strip worn off.

The pins and bushings go bad since it is a heavy door and people lean on them entering the truck and they wear faster.
 
OP
OP
S

Stewy

TYF Newbie
Joined
Jan 24, 2012
Posts
10
Reaction score
0
Looks like im going to be looking for door pins and bushings. Thanks guys
 
Top