Search results

  1. brndns_hoe

    Back after a year and a half hiatus

    here's a couple more pics, nothing special, bone stock....I'd like to put black bowties on it possibly and do the interior LEDs for starters....and definitely more tint. I probably won't go all out on this one, as I have other priorities for now(guns and other hobbies) to answer the question...
  2. brndns_hoe

    Back after a year and a half hiatus

    Thanks guys! Lol, ya the picture i did in HDR. I'll get some normal ones up later today. And definitely change the sig! Not too many plans at the moment for her. I would like to do dual exhaust or at least a magnaflow muffler in place of the stock. It's 4x4 so I would like to lift it a little...
  3. brndns_hoe

    Back after a year and a half hiatus

    i just fixed it
  4. brndns_hoe

    Back after a year and a half hiatus

    Sold the 05 tahoe last year when i had a baby, suspension wasn't too smooth for her. Anyways, I just bought an 09 LTZ 4x4. Happy to be back in a Tahoe after having an armada. The Tahoe came from Minnesota so it's got some surface rust on the undercarriage from all that salt they throw down on...
  5. brndns_hoe

    Yes! Got the free travel mod done!

    shorter bumpstops? well i actually trimmed mine down, but was still bottoming out. i figured it wouldn't be an issue on a 2/3 drop. but when i got aftermarket shocks in place of the nivomats, it went down another inch, so that was enough i guess to start bottoming out. i went on a test drive...
  6. brndns_hoe

    I have a suspension question

    I hav shock extenders and i was bottoming out. I just got rid of my bumpstop brackets, that was my issue. No more bottoming out now
  7. brndns_hoe

    Yes! Got the free travel mod done!

    Went to visit my parents in Houston for the weekend. My dad has all kinds of tools, so I whipped out the sawsall and cut the bump stop brackets off. No more bottoming out! Feels so good. It was a little scary, had to watch out for the gas tank on the left side and on the right side I had to...
  8. brndns_hoe

    Has anyone installed Z71 nerf bars and body trim?

    i installed nerf bars on my LT....got rid of my trim
  9. brndns_hoe

    How have you fixed the "wiggle" in your DEPO Tahoe headlights???

    that may be where that person wrapped electrical tape, around the holding pins, to fill in the gap of the larger holes on the headlights. I may try that on mine
  10. brndns_hoe

    truck pulls to the right, even after alignment

    full 4 wheel was done. control arm bushings....are those different than what I just installed? i'm leaning towards the tires, although I hadn't thought about the sticky caliper, is there a way to check that myself? here's the printout on the alignment....
  11. brndns_hoe

    i can drop your hoe/kon

    hey you have the tools to do the free travel mod?
  12. brndns_hoe

    Rough rear suspension And swaying

    i figured it out finally......when that shock came loose going down the road, it got bent.....it compressed once when I reattached it and after that, stayed stiff apparently. sucks, cuz i just got those shocks. but that's all fixed now, plus that piece that comes with the shock extender, I put...
  13. brndns_hoe

    truck pulls to the right, even after alignment

    so the camber was never in spec on alignment once I lowered the truck. it was maxed out. I finally got camber bushings installed to give it a couple degrees of adjustment availability, and now everything is in spec on the alignment, but it still pulls slightly to the right? can anyone think of...
  14. brndns_hoe

    Steering Issue - Double-Checking

    i need to do this too....where'd you buy the parts from?
  15. brndns_hoe

    Camber Issues with Belltech Torsion Keys

    2 inches although I forgot to measure before the install like a dumbass. But they cranked the keys way down also so I cranked them back up to where front is level with the rear. I'll have to check out those bushings. More money...ugh lol
  16. brndns_hoe

    Camber Issues with Belltech Torsion Keys

    I think mine being out of alignment is part of my front end handling issues. I've got the DJM 2/3 kit with keys and the alignment shop says the camber is maxed out. I read on DJM's website lowering with keys can cause that So my truck still pulls to the right and can get hard to handle on the...
  17. brndns_hoe

    Resale Value of Stock 17s

    i sold mine for 400 bucks within a week on craigslist, with not a lotta tread left
  18. brndns_hoe

    Rear defogger

    damn i must suck at soldering, cuz it was a ***** to get it to hold and didn't last long before popping off again, lol....
  19. brndns_hoe

    Rough rear suspension And swaying

    ***UPDATE*** Ever since my truck was lowered, and I realized they had cranked the keys down as well, and I went to raise them back up some, the right side was always higher than the left. after putting in my new bumpstops, and, as mentioned, had them resting on the control arms, tonight, I took...
  20. brndns_hoe

    Rough rear suspension And swaying

    Ya that spacer block. I'll ser what i can Finder. Ive got a dril And tap so will just need a piece of metal. And I'll check into the panhard too. Although at this point I think it's something to do with my front bympstops after talking to blueflamed. They had been cut off almost completely when...
  21. brndns_hoe

    Halo headlights junk, go Depo

    This is just my personal experience. I bought the halos off eBay and later got HiDs. Well the HiDs never fit in, just had them inside the housing all loose. This could be because some idiot here told me to use H1 bulbs and not 9006, or because the housing wasn't made right. The original bulbs it...
  22. brndns_hoe

    Rough rear suspension And swaying

    Um....so what about that part I mentioned? Is there a way to get that piece from you or somewhere? I dunno If I described it well but I can take a pic if need be
  23. brndns_hoe

    Rough rear suspension And swaying

    really, man I haven't heard anything bad about the bilsteins, that's why I got 'em. That's all anyone seems to recommend. what about that shock extender piece? and do you think a swaybar would help the wishy washy feel from side to side?
  24. brndns_hoe

    Rough rear suspension And swaying

    bilstein shocks, yes I have shock extenders, and don't wanna go lower right now....actually I got the kit from you....which reminds me. the installers didn't put the shock extender on tight, and came off going down the road, shock dropped to the ground, etc.... I reinstalled it myself, but it's...
  25. brndns_hoe

    Rough rear suspension And swaying

    I hace the djm 2/3 stop. My rear end just feels Rough. Mostly going over speed bumps I feel it and it sounds kinda strAnge whereas my front end is nice and cushy. Any ideas on what to check? My bumpstops are trimmed down. It also seems to sway from side to side more thAn before the drop. Would...

Forum statistics

Threads
129,323
Posts
1,813,921
Members
92,444
Latest member
Buzarr

Latest posts

Top