After dealing with a "clunk" in the front end for 2+ years i finally took the time to figure out the problem. Now mind you this started right after lowering it with Tony's kit. (not putting it down as its a great kit and had nothing to do with the problem). well as with somethings i was in a real hurry (in leave from overseas) plus i wasn't suppose to be working on the truck in my N-laws subdivision.
Well during the bushing install one of the CA bent so i had to get a new and press the belltech bushing out and back in the new one. (this was the problem). this caused the arm to move back and forth on the bushing when ever turning or stoping.
Well Thursday i figured this out, ordered another CA and adj. bushing. got it all installed today and man i am so glad the noise is gone.
On another note i also noticed that i installed my new sway bar-endlink bushing A$$ backwards. (again being rushed). got that all taken care of. now to sch. and appt to have the alignment checked!
Well during the bushing install one of the CA bent so i had to get a new and press the belltech bushing out and back in the new one. (this was the problem). this caused the arm to move back and forth on the bushing when ever turning or stoping.
Well Thursday i figured this out, ordered another CA and adj. bushing. got it all installed today and man i am so glad the noise is gone.
On another note i also noticed that i installed my new sway bar-endlink bushing A$$ backwards. (again being rushed). got that all taken care of. now to sch. and appt to have the alignment checked!
