Skid Plate Options

[lawfarm]

I have a 2007 GMC Yukon, 4wd. Looking for part numbers for factory skid plates, any description/pictures you may have of them, and any suggestions on aftermarket plates.

Thanks!

 

[1992rs]

http://www.bajafabrication.com/
Talk to those guys for aftermarket, they deal with border patrol vehicles. They do skid plates, undercarriage bracing and even a sweet engine cage.

 

[K2 Kaiju]

15843754 and 15049809 were the older numbers. I believe they were replaced by 20944322, 20922755. I put them on my LTZ. Non Z71 4x4 have the holes, but they are not threaded. The GM self tapping screws were $5 a pop a few years back (8 or 10 needed, cant remember). Some have used a M10 1.50 tap, but I spent the money on the GM screws. The plates are no heavy duty, so if you plan on any serious off-roading, look aftermarket...

 

[Flexx]

The ones above look sweet. I'm going to try to make my own when I get the time. Can't be that hard.

 

[Donnie Yukonie]

Moved your thread to the correct section, The better placed your thread is the better feedback you will receive.

 

[ChevyRidinHigh]

Mazulla Offroad makes the cleanest ones for Chevy. Check them out.