Problem With Power Door Locks / Lumbar

[PUN327]

Hey guys,
I had this question on another forum and was told about this site. I have a 1996 Chevy Tahoe LT. I'm in the process of replacing the carpet and stereo system. While I was removing the passenger seat, I accidentally grounded out the wires going to the lumbar. I heard the arch and immediately got the wires back in the harness. Now the lumbar, power door locks, and main cigarette lighter port will not work. I checked all the fuses and they are fine. Not really sure where to look at this point. Any help would be greatly appreciated!

Kevin

 

[dwmmatt23]

i have this same problem and think it was caused the same way. the guy i bought mine from had two 10s hooked up to the factory radio and he wired it himself, needless to say very poor job. so i think it may have come loose somewhere and made contact to fry something. all my fuses on a test light show to work. any ideas anybody?

 

[apd6847]

This is most likely a fuse in the panel behind the driver door on the side dash, I cant remember the exact number I know for a fact that it is #20-something.