George Owens
Full Access Member
- Joined
- Jun 13, 2017
- Posts
- 155
- Reaction score
- 72
is there a way to possible re calibrate or set the park assist it seems to only beep once than after that it won't let me know if I'm close to something
Park assist
- Thread starter George Owens
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
May have to dealer flash it. Did you turn it off and leave it off for a few minutes and drive around. Shut truck off then start it up and try it out.
Mine was acting funny after I pulled my camper for a few days. I ended up turning the key to the on position, putting it in reverse and tapping (messing) with each sensor and it started to work again. I had read somewhere that if you do that you can hear / feel them vibrate. I did not hear or feel anything.
Sent from my SM-G955U using Tapatalk
Sent from my SM-G955U using Tapatalk
Mine goes off when i pull any trailers or say park assit blocked and then goes off... never felt it to see if it vibrates..ill have to check it out..
