Next Avy Mods...

[micah]

I've had several positive comments on my Avy, which is very flattering. However, I'm not happy with it yet. Something is off right now. I'm thinking it is the wheels. Not sure if it is style or size.

I'll most likely remove the roof rack soon and the LT badging.

I'm open to suggestions and feedback. You guys are more experienced than I am. I just traded in my Challenger for this thing a little over a month ago, so I'm a complete noob.

Here are some pics...

Thanks in advance,
Micah

 

[07Burb]

A debadge would go a LONG ways along with your roof rack removal or get an EXT roof rack. Maybe even color match your mirrors

 

[tdrumm]

You know I love your Avy, but I think it would look even better without the roof rack, the little LT badges, and the Avalance on the tail gate. Leave the emblems and moldings on the doors.

And like was just said above, smooth and color match the entire mirror. Or maybe paint it all gloss black to blend with the windows.

Stance and wheels are perfect IMO, don't change them.

I don't know what you have going on inside, but I'd paint all the wood grain pieces silver too.

 

[LuSe4]

Is the front a little higher than the rear, or is it just me?
I would get the EXT roof rack. Besides that and a debadge, I say it is damn near perfect!

 

[micah]

You know I love your Avy, but I think it would look even better without the roof rack, the little LT badges, and the Avalance on the tail gate. Leave the emblems and moldings on the doors.

These are my exact thoughts

And like was just said above, smooth and color match the entire mirror. Or maybe paint it all gloss black to blend with the windows.

I was thinking Escalade mirrors with the painted cap and chrome accent. But I'm not sure I can handle the gap along the base.

I don't know what you have going on inside, but I'd paint all the wood grain pieces silver too.

Inside is just wood and leather. I'm pretty happy with it now. But paint might not be a bad idea. Silver and charcoal may be too boring on the inside though?

Thanks for the feedback!

 

[micah]

Is the front a little higher than the rear, or is it just me?
I would get the EXT roof rack. Besides that and a debadge, I say it is damn near perfect!

That's been a hard one to decide. Ground to lip the back is 1/2" higher in the back. But I think the shape of the top of the bed tapers towards the back creating that illusion. I've talked to some shops locally and no one thinks it can be raised any in the back. I plan to continue my search and see what advice I get online.

The debadge will happen soon as time is available. I'm going to try removing the rack first then if I decide I don't like it the EXT rack is top on the list.

Thanks for the comments. Keep em coming!

 

[micah]

Here is a nice comparison of what my truck looks like next to one that looks like mine did on the lot.

 

[Gzes]

I would pit the ext roof rack, debadge completely, and maybe invest in a small drop. Or hell what i really would do is a 6inch lift 33s and 18 rims

 

[micah]

I would pit the ext roof rack, debadge completely, and maybe invest in a small drop. Or hell what i really would do is a 6inch lift 33s and 18 rims

Hah. I thought about a lift but really wanted it to fit in the garage. But that would've been rad though!

Actually is already has a 2/4 belltech drop with 22s.

 

[fire730]

Remove the badges, moldings, and roof rack. IMO a roof rack does not belong on a truck with a bed unless it's up there to be used. I think an EXT one would look worse.

Are those GM accessory wheels? Those do look good but 24s would definitely look better since its a NNBS.

As far as the mirrors - that's a tough call. I say either all black or all silver. The only problem with the black on the bottom edge hangs over the silver too much.

Also a light tint on the headlights and tails would look good.

Do the G4 tails fit on those trucks? The OE tails look just like the Tahoe ones.

 

[Jimmyp19]

Debadge, remove roof rack, and door moldings you'll love it

 

[felixgun]

Change rims out, esky EXT roof rack, and 09+ LTZ/Denali door side moulding with chrome trim. Esky EXT Tails would look good on it too.

---------- Post added at 12:59 PM ---------- Previous post was at 12:58 PM ----------

Remove the badges, moldings, and roof rack. IMO a roof rack does not belong on a truck with a bed unless it's up there to be used. I think an EXT one would look worse.

Are those GM accessory wheels? Those do look good but 24s would definitely look better since its a NNBS.

As far as the mirrors - that's a tough call. I say either all black or all silver. The only problem with the black on the bottom edge hangs over the silver too much. I actually have the LED tails most similar to the G4's but made for the avy.

Also a light tint on the headlights and tails would look good.

Do the G4 tails fit on those trucks? The OE tails look just like the Tahoe ones.

The G4 tails do not work with this truck. I thought so too but they definitely don't as I've really looked into it. The lines are completely different.

 

[micah]

You guys are great. Thanks for all the suggestions. You've talked me into removing the moldings which I hadn't considered before.

I would've loved to do some of this today but it was 100 in the shade and I just got some ink done to boot. Next weekend is my wedding reception. So it might be a while before I have any updates.

Felix- What wheel style and size would you recommend? I've found some used 22" U2-55 locally for cheap. I've always been drawn to this wheel and the price might be hard to beat. I'm open to suggestions though!

 

[micah]

Where is a good place to look for EXT stuff anyway?

 

[OHSIXX]

Very nice Avvvy-definitely unique.

My personal favorite OEM wheel 22" CK375. Would look great on your ride.

 

[felixgun]

I'd go with oem factory 22's also. The ext roof rack I got was from eBay. I also saw ext tails on there before too. Or you could go with some aftermarket led tails.

 

[fire730]

The U2 55s are played out but they are such a clean design. But you need at least 24s. Use NathanJax's Yukon as an example of why you need 24s. His is perfect.

 

[lx4life]

I would keep the moulding, remove the emblems, get the front lip painted to match(PTM), get some escalade mirrors(PTM), Running boards(PTM), Roof rack(PTM) not the side rail keep it black, get some 24s either OEM escalade style or a wheel with a nice lip. Get aftermarket led taillights

 

[micah]

The U2 55s are played out but they are such a clean design. But you need at least 24s. Use NathanJax's Yukon as an example of why you need 24s. His is perfect.

Oh I love that Yukon. It is perfect. I wonder if I would run into any issues with 24s since I also am lowered. Any idea?

 

[micah]

I would keep the moulding, remove the emblems, get the front lip painted to match(PTM), get some escalade mirrors(PTM), Running boards(PTM), Roof rack(PTM) not the side rail keep it black, get some 24s either OEM escalade style or a wheel with a nice lip. Get aftermarket led taillights

Running boards are a good idea but what about a black roof rack? I thought they were chrome.