Help with "g5" tail lights

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

05denali702

Member
Joined
Dec 22, 2011
Posts
35
Reaction score
0
Location
Las Vegas, NV
I found three sellers on eBay that sell the "g5" but one says euro or sumn, does anyone know what is the best one I need plug m play exact escalade replica I already have the appliqués , any help appreciated thanks.. I have a 2007 yukon denali
 

racephan

TYF Newbie
Joined
Jan 25, 2013
Posts
13
Reaction score
0
Hi! I am new to the forum. Please excuse my ignorance, but what is the difference between g5 and g4 lights? Thanks
 

Goodinblack

I Like Tacos
Joined
Oct 27, 2011
Posts
22,295
Reaction score
3,046
Location
Dirty South
The ridge in the light. Does not match up with the appliques.

G3 AND G4 smooth.

G5 has a styling ridge.

From my CB Radio.
 

Goodinblack

I Like Tacos
Joined
Oct 27, 2011
Posts
22,295
Reaction score
3,046
Location
Dirty South
G5.

Need a set of appliques and paint them to match your truck.

Also a Escalade 3rd If you want.

You can then do the vegasf6 mod so it lights up all the way across to the 3rd CHMSL too.

$$$:D



From my CB Radio.
 

racephan

TYF Newbie
Joined
Jan 25, 2013
Posts
13
Reaction score
0
G5.

Need a set of appliques and paint them to match your truck.

Also a Escalade 3rd If you want.

You can then do the vegasf6 mod so it lights up all the way across to the 3rd CHMSL too.

$$$:D



From my CB Radio.

I see! So next question, what are the differences with the appliqués? Thanks so much for this info!
 

Fast55

Full Access Member
Joined
Sep 8, 2009
Posts
365
Reaction score
4
Location
Ventura County USA
Caddy appliques have the sharp "crease" that blends into their lights. G5's are an exact copy of stock Esky tails, so they match the Esky appliques but will work with your stock appliques.
 

racephan

TYF Newbie
Joined
Jan 25, 2013
Posts
13
Reaction score
0
Great info! Will the g4 lights work ok without this resistor I read about in that tutorial?
 

racephan

TYF Newbie
Joined
Jan 25, 2013
Posts
13
Reaction score
0
I think you can get by with out.

G4 are definitely the cheap way out.

I noticed the g4 are not red all the down the side, but clear at the bottom-side. Do they make a g4 that is red all the down the side? If so, where is best place to buy?
 

racephan

TYF Newbie
Joined
Jan 25, 2013
Posts
13
Reaction score
0
I have not seen them like that.

It is clear for the Reverse light to shine through.

Ok! Thanks so much for the info! I will post photos after install! I will also install the SLP tip. I ordered that yesterday.
 

Forum statistics

Threads
137,715
Posts
1,990,276
Members
102,707
Latest member
rossida
Back
Top