Exhaust Tip for stock exhaust

[DWSmoot]

For those looking like I was to add an exhaust tip to stock pipe (2.75 inlet) that actually fits, I found a good alternative if you don’t want to spend $100 for OEM. Dynomax 36472. 4” outlet and is 6” long, double wall. $36 at Summit Racing. Good quality tip.

Plan on painting it black to match my “blacked out” look and will post some more pics onve its done.

Hope this helps.

 

[drakon543]

i went with a longer summit brand one when i did my muffler swap on my 97.

 

[DWSmoot]

i went with a longer summit brand one when i did my muffler swap on my 97.

Wish I could have gone longer but on these newer models the resonator is right at the tip.

 

[DWSmoot]

Blacked out and installed.

 

[BigBlueLB756]

Me, too. Great tip.

 

[noob]

Does it work on the 6.2's? Not sure of the stock tube size.

 

[BigBlueLB756]

As stated above, this tip fits the 2.75" tail pipe with a little "massage" for a tight fit.
Not sure of the diameter of the 6.2's tail pipe. Drag out your tape measure.

 

[noob]

I ended up ordering the oem part off eBay. A dealer was selling for 50 bucks shipped

 

[DWSmoot]

That's a great price if OEM!

 

[noob]

That's a great price if OEM!

Part came in today, was a factory GM 6.2L tip. Slipped it on with a little persuasion using my rubber mallet to get where I wanted it. Then tightened with my cordless drill, and torqued down with an impact. Looks good, and it's pretty darn heavy for what it is.

https://www.ebay.com/itm/22799816-O...pid=14017022955&hash=item41e69971ef:rk:1:pf:0

You can get them there! Would take a pic, but it's night time.

 

[GTNator]

Part came in today, was a factory GM 6.2L tip. Slipped it on with a little persuasion using my rubber mallet to get where I wanted it. Then tightened with my cordless drill, and torqued down with an impact. Looks good, and it's pretty darn heavy for what it is.

https://www.ebay.com/itm/22799816-O...pid=14017022955&hash=item41e69971ef:rk:1:pf:0

You can get them there! Would take a pic, but it's night time.

Picture of the finished project?


Sent from my iPhone using Tapatalk

 

[noob]

Picture of the finished project?


Sent from my iPhone using Tapatalk

Just took some pics, it's been on for a few months and never cleaned, so it's "dull". But was definitely bright chrome when it came in.

There's a little but of "play" on how far or recessed you want it to me. The instructions tell you how far they recommend, but I didn't want it too far back that you couldn't see it, or too far forward that would hinder me say backing out on an incline somewhere. For the price I'm pleased, it scratched my itch of wanting some kinda exhaust, at least now I have the look, just not the sound. Maybe I'll add a magnaflow muffler eventually.

 

[GTNator]

Just took some pics, it's been on for a few months and never cleaned, so it's "dull". But was definitely bright chrome when it came in.

There's a little but of "play" on how far or recessed you want it to me. The instructions tell you how far they recommend, but I didn't want it too far back that you couldn't see it, or too far forward that would hinder me say backing out on an incline somewhere. For the price I'm pleased, it scratched my itch of wanting some kinda exhaust, at least now I have the look, just not the sound. Maybe I'll add a magnaflow muffler eventually.

Looks good.


Sent from my iPhone using Tapatalk

 

[jeffisgreat]

Blacked out and installed.

View attachment 209108 View attachment 209109 View attachment 209110 View attachment 209111

How did the black paint hold up? I'm shopping for a quality piece that doesn't flake off in a few months. So far EVERY one I've looked at has a customer with this compliant.

 

[Trides]

Had my tip powder coated with regular not high temp powder with no flaking

 

[midlifecrisis]

So this is just a look thing? No performance change? No sound change?