CTX-SLPR
Member
Howdy,
I did the ABS/acetone resin over fiberglass reinforcement on the back of my dash which had cracked apart so bad that there was no way to get it back together without obvious cracks. I'm wanting to cover the plastic surface with some stretchy vinyl (https://www.sailrite.com/EverSoft-Indoor-Outdoor-Black-54-Vinyl-Fabric). Calling on y'all that work in this area if it's the right stuff or I'll need something stretchier to make the corner by the instrument binnacle and the DIC controls. That seems to the most change in plane.
Thanks
I did the ABS/acetone resin over fiberglass reinforcement on the back of my dash which had cracked apart so bad that there was no way to get it back together without obvious cracks. I'm wanting to cover the plastic surface with some stretchy vinyl (https://www.sailrite.com/EverSoft-Indoor-Outdoor-Black-54-Vinyl-Fabric). Calling on y'all that work in this area if it's the right stuff or I'll need something stretchier to make the corner by the instrument binnacle and the DIC controls. That seems to the most change in plane.
Thanks
