YNOT
Full Access Member
- Joined
- May 2, 2009
- Posts
- 336
- Reaction score
- 5
Is it a knuckle breaker or is it easy?
belt change
- Thread starter YNOT
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
BlueTahoe2001
Full Access Member
Not sure..But I have to do mine soon! I think you might have to remove the Heat/Fan shroud, and Intake tube to get to the idler.
On your 01? Takes about 5 minutes.
Can't remember the size, but use a wrench on the tensioner pulley, take tension off the belt and slip it off. Install new one. If the routing diagram is missing off your radiator shroud draw one up so you know how the belt goes back on.
Can't remember the size, but use a wrench on the tensioner pulley, take tension off the belt and slip it off. Install new one. If the routing diagram is missing off your radiator shroud draw one up so you know how the belt goes back on.
Similar threads
