air bags or stiffer springs?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

BeenChevy

Full Access Member
Joined
Feb 24, 2015
Posts
496
Reaction score
240
Location
Minnesota
Those are 4"x2"? If so, may make more sense to install what I did in your stock location and then add more to the BDS axle stack. They'd fit the stock location are 4" diameter and about 5.5" tall. Been looking getting some of the leaf spring ones for the trailer after looking into them more..

IMG_20230215_113413_266.jpg
 
OP
OP
gmartin1215

gmartin1215

Full Access Member
Joined
Nov 9, 2012
Posts
235
Reaction score
102
Those are 4"x2"? If so, may make more sense to install what I did in your stock location and then add more to the BDS axle stack. They'd fit the stock location are 4" diameter and about 5.5" tall. Been looking getting some of the leaf spring ones for the trailer after looking into them more..

View attachment 392451
The specs for the builder springs are 4" diam and 5" tall, plus spacers.
But, your suggestion could work too if I can figure out what to use to stack on the axle bracket. Without something there, I am still going to have a about 3" gap with the Sumo replacement.
 
Last edited:
Top