upper control arms

  1. CruelJung

    First Time DIY UCA/LCA (& Outer Tie Rods) Replacement - Any Guidance?

    I am soon to be replacing my front upper and lower control arms, as well as outer tie rods. I have some background, current plans, tools, etc. below, and some more specific questions towards the end. Please let me know your thoughts, thanks! Background In brevity, I found top-to-bottom play in...
    • CruelJung
    • Thread
    • dirt king gmt900 kryptonite lower control arms rwd tie rods upper control arms yukon
    • Replies: 2
    • Forum: Street Suspension
  2. Dadnali68

    Thoughts on greasable upper amd lower control arm bolts?

    Hi all, Had to take the ride into a shop for some electrical work. While I was in there the shop found three out of four ball joints were going bad in the front. It's a semi rusty western NY truck, so I'm going to do upper and lower control arms. Moogs with the greasable ball joints. Shop owner...
  3. petethepug

    Aluminum / XFE NNBS Front Suspension Rebuild

    It's front-end refresh time. I'm fast approaching 180K miles on our 09 Esky ESV. It has the original everything on the suspension. The front sway bar bushings have been replaced with poly recently because they were ready to disintegrate. While looking around at parts I saw that aluminum upper...
  4. P

    Broken camber bolt, HELP!

    Hello all, newbie to the forum looking for help, trying to change upper control arm, nut side broke off in bushing :( was going to sawzall it off and get a new bolt but wanted to make sure I dont damage the brackets on the frame. Ive read to pry the bracket away enough to get a sawzall blade...
  5. RoBear727

    5in lift upper control arms

    Morning everyone, I believe this is my first post here. So a little background so hopefully it’ll help with answers. I have a 2007 Tahoe lt 4x4. It is currently has a 5 in rough county lift.( spacers up front ). Sitting on 35x12.5x18s. I had the issue where the front was sitting lower than the...
  6. Bowtied

    2007 2wd 3.5" RC UCAs/UCA pockets/alignment

    Hi y'all! So I got a 3.5" RC kit installed on the '07, love the look and have no issues running 33x12.5's on 20x10 with -19 offset. However, when it comes to alignment, with stock struts and spacers installed within the kit, the toe is straight (it drives straight) but the caster has no room...

Forum statistics

Threads
138,035
Posts
1,997,524
Members
102,972
Latest member
mudrunnerz

Latest posts

Back
Top